Skip to main content
European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

Application relevant validation of c-Si based tandem solar cell processes with 30 % efficiency target

Descripción del proyecto

Células solares de c-Si innovadoras con mayor eficiencia de conversión

La tecnología de células solares de silicio cristalino (c-Si) domina el mercado fotovoltaico debido a la disponibilidad y estabilidad de las células solares de obleas de silicio cristalino. Sin embargo, para que la tecnología mantenga su posición, se debe mejorar la eficiencia de la conversión y reducir los costes. Sin estos avances, las células solares de c-Si corren el riesgo de perder su hegemonía. En este sentido, el equipo del proyecto SiTaSol, financiado con fondos europeos, pretende aumentar la eficiencia de conversión de las células solares c-Si hasta en un 30 %. Esto se conseguirá combinándolos con absorbedores superiores III-V, lo que supondrá un importante ahorro de superficie y consumo de material para la generación de electricidad fotovoltaica. El proyecto ofrece claras ventajas sobre los productos existentes. El equipo también pretende evaluar procesos rentables que permitan sustituir la fotovoltaica terrestre de placa plana de Si por la célula en tándem III-V/Si.

Objetivo

Crystalline silicon wafer solar cells have been dominating the photovoltaic market so far due to the availability and stability of c-Si and the decades of Si technology development. However, without new ways to improve the conversion efficiencies further significant cost reductions will be difficult and the c-Si technology will not be able to maintain its dominant role. In the SiTaSol project we want to increase conversion efficiencies of c-Si solar cells to 30 % by combining it with III-V top absorbers. Such a tandem solar cell will result in huge savings of land area and material consumption for photovoltaic electricity generation and offers clear advantages compared to today’s products. The III-V/Si tandem cell with an active Si bottom junction with one front and back contact is a drop-in-replacement for today’s Si flat plate terrestrial PV. To make this technology cost competitive, the additional costs for the 2-5 µm Ga(In)AsP epitaxy and processing must remain below 1 €/wafer to enable module costs <0.5 €/Watt-peak. It is the intention of the SiTaSol project to evaluate processes which can meet this challenging cost target and to proof that such a solar cell can be produced in large scale. Key priorities are focused on the development of a new growth reactor with efficient use of the precursor gases, enhanced waste treatment, recycling of metals and low cost preparation of the c-Si growth substrate. High performance devices will be demonstrated in an industrial relevant environment. The project SiTaSol approaches these challenges with a strong industrial perspective and brings together some of the most well-known European partners in the field of Si PV and III-V compound semiconductors. Furthermore SiTaSol will support the competitiveness of the European industry by providing innovative solutions for lowering manufacturing costs of III-V materials which are essential in today’s electronic products including laptops, photonic sensors and light emitting diodes.

Convocatoria de propuestas

H2020-LCE-2016-2017

Consulte otros proyectos de esta convocatoria

Convocatoria de subcontratación

H2020-LCE-2016-RES-CCS-RIA

Régimen de financiación

RIA - Research and Innovation action

Coordinador

FRAUNHOFER GESELLSCHAFT ZUR FORDERUNG DER ANGEWANDTEN FORSCHUNG EV
Aportación neta de la UEn
€ 1 197 668,75
Dirección
HANSASTRASSE 27C
80686 Munchen
Alemania

Ver en el mapa

Región
Bayern Oberbayern München, Kreisfreie Stadt
Tipo de actividad
Research Organisations
Enlaces
Coste total
€ 1 197 668,75

Participantes (6)