Skip to main content
European Commission logo
italiano italiano
CORDIS - Risultati della ricerca dell’UE
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

Driving up Reliability and Efficiency of Additive Manufacturing

Risultati finali

DREAM school (M30)

Training event to be organized in Italy (Target 40 attendants: students, technicians, researchers). The School will be focused on practical application of additive manufacturing at industrial levels. Industrial partners of the project will be involved.

Communication Kit – Final release

The communication kit will include: Project Logo, Project Presentation in one sheet, Project Leaflet, Project Partner Presentations and Project gadgets.

Communication Kit – Second release

The communication kit will include: Project Logo, Project Presentation in one sheet, Project Leaflet, Project Partner Presentations and Project gadgets.

Communication Kit - First release

The communication kit will include: Project Logo, Project Presentation in one sheet, Project Leaflet, Project Partner Presentations and Project Gadgets.

Training plan

Report on the different training approaches of the project: Schools, Staff Exchange, Cross-Fertilizations, Meetings, Lessons learnt.

PEDR - 2nd release

dissemination of results. Dissemination key elements: i) the objectives of the dissemination (mission, vision), ii) the subjects of dissemination (what will be disseminated), iii) the target audience (to whom it will be disseminated), iv) the dissemination methods (how it will be disseminated), v) the distribution of responsibilities for dissemination (who will perform the dissemination) and rules for planning and performing dissemination activities. Exploitation key elements: i) Impact of the proposed solutions on industry ii) Commercial uptake iii) IPR foreground and background iv) exploitation plans of each partner and the consortium as a whole

Final Workshop

The final Workshop will be organized in Italy with the title: “Excellence in laser-based additive industrial manufacturing; from the lab to real industrial applications”.

Project presentation (Initial)

Presentation of project main objectives and contents to address general audience

Project graphic identity (LOGO), leaflet and poster

High resolution project logo with a reference to metal powders and additive manufacturing. Two page leaflets. Poster alighed with EC periodic conferences (i.e. Industrial Technology).

Project Handbook

The Handbook provides the Partners with a concise reference to the project management structure, tasks, responsibilities and procedures at all levels of project execution. Additionally, this document comprises documentation and communication standards in order to enable quick and efficient communication within the project consortium.

KPI Report

The report will verify the achievement of Project KPI: KPI1: at least 15% weight reduction of parts optimized in topology and for AM KPI2: reduction of more than 10% of material cost KPI3: increase over 15% of productivity achieved for PBF process KPI3: increase over 5% of production speed of laser PBF systems KPI5: increase above 20% of fatigue strength of metal parts produced with laser PBF (up to +120%)

PEDR - 1st release

dissemination of results. Dissemination key elements: i) the objectives of the dissemination (mission, vision), ii) the subjects of dissemination (what will be disseminated), iii) the target audience (to whom it will be disseminated), iv) the dissemination methods (how it will be disseminated), v) the distribution of responsibilities for dissemination (who will perform the dissemination) and rules for planning and performing dissemination activities. Exploitation key elements: i) Impact of the proposed solutions on industry ii) Commercial uptake iii) IPR foreground and background iv) exploitation plans of each partner and the consortium as a whole

Goal and Scope LCA and end of life scenarios

General and public introduction to the aim of LCA and end of life scenarios. A process/product preliminary environmental evaluation will be done.

Prototypal components (femoral stem, Engine subframe)

Femoral stem and engine subframe, optimized in geometry, material and construction

Project Website

The website will have a .EU domaim. The website will be organized in a Public and Private Area. The public area will have the following sections: introduction, main objectives, description of work, events, networking, downloads, Web 2.0 Social Media (Facebook, Linkedin and Twitter).

Pubblicazioni

Abstracts from XIV AIMAT National Congress, XI National Conference on Materials Science and Technology, July 2017, Ischia, Italy

Autori: Sciancalepore C., Gatto A., Defanti S., Denti L., Bassoli E., Ferrari A.M., Barucca G., Mengucci P., Bondioli F.
Pubblicato in: Journal of Applied Biomaterials & Functional Materials, Numero 15/4, 2017, Pagina/e 0-0, ISSN 2280-8000
Editore: Wichtig Editore s.r.l.
DOI: 10.5301/jabfm.5000369

Environmental sustainability of orthopedic devices produced with powder bed fusion

Autori: Grazia Maria Cappucci, Martina Pini, Paolo Neri, Marta Marassi, Elena Bassoli, Anna Maria Ferrari
Pubblicato in: Journal of Industrial Ecology, Numero 17.12.2019, 2019, ISSN 1088-1980
Editore: MIT Press
DOI: 10.1111/jiec.12968

Additively manufactured femoral stem topology optimization: case study

Autori: Sorin Munteanu, Daniel Munteanu, Bogdan Gheorghiu, Tibor Bedo, Camelia Gabor, Patrizio Cremascoli, Fabio Alemani, Mihai Alin Pop
Pubblicato in: Materials Today: Proceedings, Numero 19, 2019, Pagina/e 1019-1025, ISSN 2214-7853
Editore: Elsevier
DOI: 10.1016/j.matpr.2019.08.016

Microstructure, phase transformations and properties’ evaluation of Al-Si-Ni metastable alloys

Autori: Alexandra Nitoi, Tibor Bedo, Bela Varga, Mihai Alin Pop, Daniel Munteanu
Pubblicato in: Materials Today: Proceedings, Numero 19, 2019, Pagina/e 1091-1098, ISSN 2214-7853
Editore: Elsevier
DOI: 10.1016/j.matpr.2019.08.025

Weight reduction by topology optimization of an engine subframe mount, designed for additive manufacturing production

Autori: Andrea Merulla, Andrea Gatto, Elena Bassoli, Sorin Ion Munteanu, Bogdan Gheorghiu, Mihai Alin Pop, Tibor Bedo, Daniel Munteanu
Pubblicato in: Materials Today: Proceedings, Numero 19, 2019, Pagina/e 1014-1018, ISSN 2214-7853
Editore: Elsevier
DOI: 10.1016/j.matpr.2019.08.015

Ti–Zr–Si–Nb Nanocrystalline Alloys and Metallic Glasses: Assessment on the Structure, Thermal Stability, Corrosion and Mechanical Properties

Autori: Camelia Gabor, Daniel Cristea, Ioana-Laura Velicu, Tibor Bedo, Andrea Gatto, Elena Bassoli, Bela Varga, Mihai Alin Pop, Victor Geanta, Radu Stefanoiu, Mirela Maria Codescu, Eugen Manta, Delia Patroi, Monica Florescu, Sorin Ion Munteanu, Ioana Ghiuta, Nicoleta Lupu, Daniel Munteanu
Pubblicato in: Materials, Numero 12/9, 2019, Pagina/e 1551, ISSN 1996-1944
Editore: MDPI Open Access Publishing
DOI: 10.3390/ma12091551

Cross-Contamination Quantification in Powders for Additive Manufacturing: A Study on Ti-6Al-4V and Maraging Steel

Autori: Eleonora Santecchia, Paolo Mengucci, Andrea Gatto, Elena Bassoli, Silvio Defanti, Gianni Barucca
Pubblicato in: Materials, Numero 12/15, 2019, Pagina/e 2342, ISSN 1996-1944
Editore: MDPI Open Access Publishing
DOI: 10.3390/ma12152342

Metastable Al–Si–Ni Alloys for Additive Manufacturing: Structural Stability and Energy Release during Heating

Autori: Tibor Bedo, Bela Varga, Daniel Cristea, Alexandra Nitoi, Andrea Gatto, Elena Bassoli, Georgiana Bulai, Ioana-Laura Velicu, Ioana Ghiuta, Sorin Munteanu, Mihai Alin Pop, Camelia Gabor, Mihaela Cosnita, Luminita Parv, Daniel Munteanu
Pubblicato in: Metals, Numero 9/5, 2019, Pagina/e 483, ISSN 2075-4701
Editore: MDPI
DOI: 10.3390/met9050483

Enhancing The Quality Of Metal Powder Feedstock For Laser PBF Through Cross-contamination Removal

Autori: E. Santecchia, P. Mengucci, A. Gatto, E. Bassoli, L. Denti, B. Gheorghiu, G. Barucca
Pubblicato in: Euro PM2019 Proceedings, Numero 16.10.2019, 2019
Editore: EPMA

Development of a Reliable Method for Contamination Detection in Raw Metal Powders for Additive Manufacturing

Autori: E. Santecchia, P. Mengucci, A. Gatto, E. Bassoli, L. Denti, F. Bondioli, G. Barucca
Pubblicato in: EuroPM18 Proceedings, Numero 14.10.2018, 2018
Editore: EPMA

Life Cycle Thinking in decision-making for sustainability: from public policies to private businesses Evaluation of environmental sustainability in additive manufacturing processes for orthopaedic devic

Autori: G.M.Cappucci, M.Pini, P.Neri, M.Marassi , Elena Bassoli and A.M.Ferrari
Pubblicato in: Proceedings of the 12th Italian LCA Network Conference, Messina, 11-12th June 2018, Numero 11.06.2018, 2018
Editore: Italian NaAgency for New Technologies, Energy and Sustainable Economic Development (ENEA)

È in corso la ricerca di dati su OpenAIRE...

Si è verificato un errore durante la ricerca dei dati su OpenAIRE

Nessun risultato disponibile