Resultado final
Definition of the methodogical framework for LCA/LCCA/S-LCA of RE4 innovative solutions.
Use of economic instrumentsAssessment of economic instruments of CDW management for European representative countries.
Composition of materials from demolition and available volumes of sorted fractionsThe report will outline the typical composition and volumes of materials arising from demolition activities, focusing on the fraction defined in WP2.
Products HSE analysisReport on HSE performances of products.
Report on Training activitiesReport on training activities within the project.
Structural modellingReport on structural modelling of developed prefabricated elements (renovation and new construction).
Disassembly. RE4 disassembly Vs. conventional buildingsDescription of the whole disassembly processes, including their evaluation and quantification by means of the indicators describe inWP3.
Market AssessmentPreliminary market analysis of the European market of CDW recycling and reuse.
Promo material designCommunication toolkit: Project presentation, brochure, roll-up poster, e-newsletter design
Hygrothermal modellingReport on hygrothermal modelling of developed elements (renovation and new construction).
Business Models (BMs) and Business PlansBMs based on the new value chain, Business Plans focused on the sustainability strategy and replicability.
Certification frameworkFactsheet including all certification issues (only a template to be filled in task 7.6).
Data collection on CDWThe report will outline the EU situation with regard to CDW management.
Report on policy workshops and awareness campaignReport assessing policy workshops organization and awareness campaign.
Product documentationPreliminary products documentation.
Geometrical, physical and chemical characterisation of CDW-derived materialsGeometrical, physical and chemical characterisation of materials from demolition activities will be summarised and described in the report, along with the results from the durability Task. Mineral, fine, lightweight materials and timber will be characterised.
Quality classes and potential applications for recovered CDW-derived materialsA classification according the potential for several applications (structural and non-structural) will be given for the fraction identified from the Project.
Fire modellingReport on fire modelling of developed elements (renovation and new construction).
Effect of the variability of CDW batchesThe results from the investigation on the effects of variability in the quality of recovered materials will be described.
Scaled-up processesReport on gathering of the specification of the conceptual design of the scaled-up processes.
Overview on the current status of construction of prefabricated elements with recycled materialsThe report will outline EU current trends in the reuse/recycling of CDW in prefabricated elements.
S-LCA analysisReport on S-LCA analysis.
LCA/LCCA analysisReport on ILCD compliant LCA/LCCA analysis.
CDW specifications and material requirements for prefabricated structuresThis deliverable collects the features of CDW materials feeding the sorting system and the required specifications for recycled materials to be used for prefabrication.
Certification and standardizationReport on Certification strategy and contribution to standardization.
Processes HSE analysisReport on processes HSE performances.
Overview on the current status on policy measures and regulatory frameworksThe report will outline EU policies and regulations about prefabricated elements integrating recycled materials from CDW.
Life cycle data collectionCollection of primary life cycle data related to the different products and processes developed in the RE4-Project.
Communication and Dissemination PlanThe Plan will identify target audiences, key messages, communication channels, roles and timelines.
Statistics assessmentReport containing a comparison between D11 data with previous study
DMP will analyse the main data uses and explore the restrictions related to IPR according with the Consortium Agreement.
Installation of the panels/blocks on an existing façade. Description of the set-up of the installation of the façade panels. Report and demonstrator.
Prefabricated elements production and testingProduction details and characterization of the elements, which will be produce in quantity enough to build the prototypes. Report and samples.
Mock-ups executionNew residential and/or commercial buildings construction. Description of the whole construction process. Report and demonstrator.
Website will be designed for both private and public access, hosted by FENIX.
Publicaciones
Autores:
Tommaso Zerbi; Roberto Landò
Publicado en:
Proceedings of the HISER International Conference (2017): Advances in Recycling and Management of Construction and Demolition Waste, Edición 3, 2017, Página(s) 51-54
Editor:
TU Delft Library
Autores:
Agnese Attanasio; Alessandro Largo
Publicado en:
2nd International Conference on Applied Mineralogy & Advanced Materials AMAM-ICAM 2017;, Edición 1, 2017, Página(s) 7-12, ISSN 2283-5954
Editor:
Digilabs Srls
DOI:
10.14644/amamicam.2017.002
Autores:
Agnese Attanasio, Alessandro Largo
Publicado en:
SCIENTIFIC RESEARCH ABSTRACTS Volume 9/Digilabs, Edición July 2018, 2018, Página(s) 6, ISSN 2464-9147
Editor:
International Conference MMS 2018 (Italy)
DOI:
10.5281/zenodo.3490766
Autores:
Alessandro Largo, Agnese Attanasio
Publicado en:
SCIENTIFIC RESEARCH ABSTRACTS Volume 6/Digilabs, Edición June 2017, 2017, Página(s) 54, ISSN 2464-9147
Editor:
International Conference AMAM-ICAM 2017
DOI:
10.5281/zenodo.3490932
Autores:
M. Whittaker, K. Grigoriadis, M. Soutsos, W. Sha, A. Klinge, S. Paganoni, M. Casado, L. Brander, M. Scullin, R. Correia, T. Zerbi, G. Staiano, I. Merli, I. Ingrosso, A. Attanasio and A. Largo
Publicado en:
RILEM Spring Convention and Conference - Sustainable Materials Systems and Structures SMSS 2019, Edición volume 2, 2019, Página(s) 158-165, ISBN 978-2-35158-218-3
Editor:
RILEM Publications s.a.r.l
DOI:
10.5281/zenodo.3741344
Autores:
Agnese Attanasio, Vito Tarantino, Alessandro Largo
Publicado en:
5th Workshop on The New Boundaries of Structural Concrete 2019, 2019, Página(s) 145-154
Editor:
ImReady
DOI:
10.5281/zenodo.3742952
Autores:
Agnese Attanasio, Alessandro Largo
Publicado en:
Proscience, Edición Vol. 6, 2018, Página(s) 1-6, ISSN 2283-5954
Editor:
Digilabs
DOI:
10.14644/mms.2018.001
Autores:
K. Grigoriadis, M. Whittaker, M. Soutsos, W. Sha, L. Napolano, A. Klinge, S. Paganoni, M. Casado, L. Brander, M. Prieto Rabade, U. Mueller, M. Mousavi, O. During, M. Scullin, R. Correia, T. Zerbi, I. Merli, I. Ingrosso, A. Attanasio and A. Largo
Publicado en:
Fifth International Conference on Sustainable Construction Materials and Technologies (SCMT5), Edición Vol. 1, 2019, Página(s) 400-414, ISSN 2515-3048
Editor:
Kingston University
Autores:
Andrea Klinge, Eike Roswag-Klinge, Christof Ziegert, Caroline Kaiser, Danijela Bojic
Publicado en:
The Extracellular Matrix - Methods and Protocols, Edición 1952, 2019, Página(s) 163-174, ISBN 978-1-4939-9132-7
Editor:
Springer New York
DOI:
10.1007/978-981-13-5883-8_15
Autores:
A Klinge, E Roswag-Klinge, L Radeljic, M Lehmann
Publicado en:
IOP Conference Series: Earth and Environmental Science, Edición 225, 2019, Página(s) 012052, ISSN 1755-1315
Editor:
BAMB 2020, event “BUILDINGS AS MATERIAL BANKS – A PATHWAY FOR A CIRCULAR FUTURE”
DOI:
10.1088/1755-1315/225/1/012052
Autores:
Mark James Whittaker, Konstantinos Grigoriadis, Marios Soutsos, Wei Sha, Andrea Klinge, Sara Paganoni, Maria Casado, Linus Brander, Marjan Mousavi, Michael Scullin, Ruben Correia, Tommaso Zerbi, Giovanni Staiano, Irene Merli, Ilaria Ingrosso, Agnese Attanasio, Alessandro Largo
Publicado en:
Advances in Building Energy Research, 2019, Página(s) 1-17, ISSN 1751-2549
Editor:
Earthscan Publications Ltd
DOI:
10.1080/17512549.2019.1702586
Autores:
A Klinge, E Roswag-Klinge, S Paganoni, L Radeljic, M Lehmann
Publicado en:
IOP Conference Series: Earth and Environmental Science, Edición 323, 2019, Página(s) 012022, ISSN 1755-1315
Editor:
IOP Publishing
DOI:
10.1088/1755-1315/323/1/012022
Autores:
A. Largo, S. Saracino - CETMA
Publicado en:
CPI, Edición Volume 1-February 2018, 2018, Página(s) 26-29
Editor:
CPI Digital Editions ad-media GmbH
Autores:
P. Topolcanova - Fenix, A. Largo - CETMA
Publicado en:
European Energy Innovation Magazine, Edición December 2018, 2018, Página(s) 31, ISBN 978-92-64-28230-8
Editor:
Prologue Media Limited
DOI:
10.5281/zenodo.3371144
Autores:
L. Brander, U. Mueller, K. Malaga - RISE
Publicado en:
CBI nytt, Kundtidning fran CBI Betonginstitutet, Edición 2/2016, 2016, Página(s) 6, ISSN 0349-2060
Editor:
CBI Betonginstitutet
DOI:
10.5281/zenodo.3736230
Autores:
Alessandro Largo
Publicado en:
Platinum magazine, 2019, Página(s) 132, ISSN 2038-2596
Editor:
New Business Media Srl
DOI:
10.5281/zenodo.3673862
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles