CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.
Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.
Leistungen
This report will contain all dissemination and publication activities of the MoNIfly project (year 2).
UTM server ISD (Interface Specifications Document) for ATCThis report will give a detailled description of the interfaces of the UTM system to the Air Traffic Control (ATC) systems.
MoNIfly project validation programA practical guide for the test at Airport Twente and Dusseldorf Weeze, safety & security procedures including quality assurance and risk management. A dedicated sub-chapter named “MoNIfly Test Procedures” will be included where the specific procedures for health and safety of involved persons will be described. This test procedures will be conform EASA rules or / and specific rules for the airports.
Detailed MoNIfly Dissemination and Exploitation planA detailled plan with planned dissemination and exploitation events will be presented. This deliverable will also include the process for all dissemination and expoitation activities.
UTM server ISD (Interface Specifications Document) for first respondersThis report will specify and detail the interfaces of the MoNIfly system to first responders.
Connection of flight computer and UTM modemReport on the connection of flight computer and UTM modem. This deliverable will descirbe a physical interface onboard UTM modem to which drone’s flight computer can be connected to. Using this interface flight computer will receive information from UTM modem regarding e.g. No Fly Zones.
1st yearly report on publication and dissemination activitiesThis report will contain all dissemination and publication activities of the MoNIfly project (year 1).
Network optimization reportReport will include a detailed information about signal coverage, strength and speed measurements of the network before and after optimization for UTM.
Evaluation of testCoordinate the output together with partners and set up second phase of the validation program including complex tests. This will be done by evaluation criteria in earlier stage.
Report on mobile network at Twente airportSummary of the installation of the mobile network, listing capabilities and limitations. This report will contain a description of hardware parts used for installation of the mobile network including the information on how the mobile network performs in terms of speed, coverage and other network capabilities.
3rd yearly report on publication and dissemination activitiesThis report will contain all dissemination and publication activities of the MoNIfly project (all 3 years).
Scenario Definition DocumentThe MoNIfly scenarios will be described in this report. The scenarios will be executed to validate the operational and technical levels of the UTM.
CONOPS DocumentThis deliverable will describe the MoNIfly concept of operations for an UTM system. It will detail the systems functions and purpose for all components (ground and airborne segment). The intended mode of operation will also be elaborated.
Validation ReportThis report contains the final description of the validation exercises and the achieved results based on earlier criteria given by the other project partners.
Drone operator user interfaceDemonstration of the safe navigation, conflict detection, and cooperation capabilities of the customized drone.
Impact assessment reportA report summarizing the impact assessment of the UTM system with parts focussing on - performance and operational gains supported by UTM based on use of cellular network. - safety assessment of the UTM system operation supported by the cellular network use. - the commercial impact of commercial drone users, for the evolution of the drone market.
Organizing and planning validationGet permission to fly with the UAV's at the test center in Twente and Airport Weeze, set up communication with the Airtraffic Manager, local, regional and national authoritie, UAV’s specified for this project, sensors, certified pilots and communicate with NSN about practical issues.
UTM Modem ISD (Interface Specifications Document)This report will contain the detailed specification of the interfaces to the UTM modems.
UTM Technical Specifications DocumentThe detailed descriptions of the technical developments will be provided inside this report. The document will describe the technical specification and features needed for UTM system to support the scenarions defined in D1.3.
This demonstrator will be the prototype of the first drone fitted with UTM modem and customized to navigate in the MoNIfly UTM environment.
Validation process (1)Organize safety and security measurements, and coordinate tests. Communcating procedures with project partners and local authorities.
Prototype UTM modemThis demonstrator will be a hardware capable of connecting to LTE network. It will in addition be capable to connect to different onboard sensors (gps, barometer..etc) which will be used for drone tracking and monitoring with the help of UTM software.
Validation process (2)Organize safety and security measurements and coordinate test and review with partners. Coordinate flights with local and national authorities.
Interface to generate Geo-fencesDemonstration of the interfaces to generate static and dynamic geo-fence areas.
The MoNIfly website will be live for public access.
Veröffentlichungen
Autoren:
Thomas Krüger, Björn Blom, Thomas Feuerle
Veröffentlicht in:
Transportation Research Procedia, Ausgabe 43, 2019, Seite(n) 309-318, ISSN 2352-1465
Herausgeber:
INAIR 2019
DOI:
10.1016/j.trpro.2019.12.046
Suche nach OpenAIRE-Daten ...
Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten
Es liegen keine Ergebnisse vor