Engineering, production and life‐cycle management for the complete construction of large‐length FIBRE‐based SHIPs

Informazioni relative al progetto

FIBRESHIP

ID dell’accordo di sovvenzione: 723360

DOI 10.3030/723360

Progetto chiuso

Data della firma CE 22 Maggio 2017

Data di avvio 1 Giugno 2017

Data di completamento 31 Maggio 2020

Finanziato da

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Costo totale € 11 041 212,50

Contributo UE € 8 866 322,75

Coordinato da

TECNICAS Y SERVICIOS DE INGENIERÍA, S.L.
Spain

Risultati finali

Other (4)

Release and distribution of software versions among partners, together with documentation and training courses.
1st FIBRESHIP workshop
Final Open-door Industrial day
2nd FIBRESHIP workshop

Documents, reports (10)

A set of guidelines on inspection, repair, monitoring and maintenance applicable to FIBRESHIP concepts

A set of guidelines on inspection, repair, monitoring and maintenance applicable to FIBRESHIP concepts

Guidance for the use of composite materials in large length ships

Catalogue of applicable materials and joining techniques recommended by classification societies

Class rules & guidelines

Class Rules & Guidance notes

Measurements report
Project guidance notes

Project design guidance notes

A Report on waste management in the implementation of FIBRESHIP concepts
Shipyards adaptation to develop this new activity
Exploitation Plan and Agreement Report

Final Exploitation Plan and Agreement Report

Report and database on the results of the fire performance experiments.

Report and database on the results of the fire performance experiments

Report including the validations and benchmarking of the different developments

Report including the validations and benchmarking of the different developments.

Demonstrators, pilots, prototypes (1)

Engineering and production of the demonstrator

Pubblicazioni

Peer reviewed articles (4)

Numerical and experimental procedure for material calibration using the serial/parallel mixing theory, to analyze different composite failure modes

Autori: Joel Jurado Granados, Xavier Martinez, Niamh Nash, Carlos Bachour, Ioannis Manolakis, Anthony Comer, Daniel Di Capua
Pubblicato in: Mechanics of Advanced Materials and Structures, 2019, Pagina/e 1-19, ISSN 1537-6494
Editore: Taylor & Francis
DOI: 10.1080/15376494.2019.1675106

Fully 3D ship hydroelasticity: monolithic versus partitiones strategies for tight coupling

Autori: B. Serván, D. Di Capua, J. García-Espinosa
Pubblicato in: Marine Structures, 2020, ISSN 0951-8339
Editore: Elsevier BV

Thermo-mechanical analysis of laminated composites shells exposed to fire

Autori: R. Pacheco, D. Di Capua, J. García-Espinosa, O. Casals, T. Hakkarainen
Pubblicato in: Composite Structures, 2019, ISSN 0263-8223
Editore: Elsevier BV

Effect of environmental conditioning on the properties of thermosetting- and thermoplastic-matrix composite materials by resin infusion for marine applications

Autori: N.H. Nash, A. Portela, C.I. Bachour-Sirerol, I. Manolakis, A.J. Comer
Pubblicato in: Composites Part B: Engineering, Numero 177, 2019, Pagina/e 107271, ISSN 1359-8368
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compositesb.2019.107271

Conference proceedings (13)

FIBRESHIP project: Engineering, production and life cycle management for the complete construction of large lenght fibre based ships

Autori: A. Jurado, C.García, E. Sanchez, P. Beltran
Pubblicato in: Procedings of 8th Transport Research Arena TRA 2020, April 27-30, 2020, Helsinki, Finland, 2020
Editore: TRA

Mechanical evaluation of a fire retardant through-thickness reinforced sandwich structure for marine applications

Autori: Portela, Athavale, Manolakis, Comer
Pubblicato in: SAMPE 2019, 2019
Editore: Society for the Advancement of Material and Process Engineering

Experimental Investigation on the effect of thickness on the flexural properties of glass/vinyl-ester composite laminates for marine applications

Autori: Nash, Portela, Bachour, Manolakis, Comer
Pubblicato in: MECHCOMP 2019, 2019
Editore: Técnico Lisboa

First steps of the FIBRESHIP project: Engineering, production and life cycle managment for the complete construction of large lenght fibre-based ships.

Autori: R. Salinas, I. García, J. García Espinosa, X. Martinez
Pubblicato in: Proceedings of 7th Transport Research Arena TRA 2018, April 16-19, 2018, Vienna, Austria, 2018
Editore: TRA

FIBRESHIP, the greatest challenge of using composite materials for the construction of large-lenght ships.

Autori: A. Jurado, C.García, E. Sanchez
Pubblicato in: Procedings of MATCOMP19 (Spanish National Congress of Composite Materials), July, 3-5, 2019, Vigo, Spain, 2019, ISSN 2531-0739
Editore: AEMAC

Mechanical characterization of polymer composite materials for long length ships

Autori: Haldar, Gobikannan, Portela, Comer
Pubblicato in: MARINE DESIGN 2020, 2020
Editore: Royal Institution of Naval Architects

Experimental Investigation on the effect of water ingress on the flexural and interlaminar properties of glass/vinylester composite for marine applications

Autori: Portela, Nash, Bachour, Manolakis, Comer
Pubblicato in: Marine Aging of Polymers and Mechanical Performance Conference 2019, 2019
Editore: European Mechanics Society

Kuitulujitteisten muovien paloturvallisuus laivoissa / Fire safety of fibre-reinforced polymers in ships

Autori: T. Hakkarainen
Pubblicato in: FINNISH FIRE SAFETY DAYS 2019, 2019
Editore: n/a

FIRE SIMULATIONS OF A FISHING RESEARCH VESSEL WITH FRP STRUCTURES

Autori: A. Tissari, T. Korhonen, T. Kling, A. Korkealaakso, T. Hakkarainen, T. Hakkarainen
Pubblicato in: MARINE DESIGN 2020, 2020
Editore: The Royal Institution of Naval Architects

Fire performance assessment of FRP materials

Autori: T. Hakkarainen
Pubblicato in: NORDIC FIRE AND SAFETY DAYS 2018, 2018
Editore: NFSD

FIBRESHIP - Paloturvallisia materiaaleja kevyisiin laivoihin / FIBRESHIP - Fire safe materials for lightweight ships

Autori: T. Hakkarainen
Pubblicato in: FINISH FIRE SAFETY DAYS 2017, 2017
Editore: n/a

Thermoplastic infusible resin systems: candidates for the marine sector?

Autori: N. Nash, C. Sirerol, I. Manolakis and A. Comer
Pubblicato in: ECCM 2018, 2018
Editore: European Conference on Composite Materials

Bio-based epoxy resin systems as potential alternatives to petroleum based epoxy matrices in marine fibre-reinforced polymer composites

Autori: N. Nash, L. Egan, C. Bachour, I. Manolakis and A. Comer
Pubblicato in: 2018
Editore: THERMOSETTING RESINS CONFERENCE