Lignin Based Carbon Fibres for Composites

Livrables

Project outputs published in project repository/ website - Open Access

Demonstration to industry (event and report)

Demonstration to industry (event and report).

Regular management activities performed by organisational bodies

Regular management activities performed by organisational bodies. This is a continuous activity over the duration of the project.

Closing Dissemination Seminar

Closing Dissemination Seminar.

Regular management activities performed by organisational bodies (M36)

Regular management activities performed by organisational bodies. This is a continuous activity over the duration of the project.

Archiving Plan

Archiving Plan.

Publications in scientific and technical journals

Publications in scientific and technical journals to be delivered in M12 and M48.

Recommendations for optimal routes to sustainable exploitation of LIBRE materials and processes from completed economic analysis of LIBRE outputs

Recommendations for optimal routes to sustainable exploitation of LIBRE materials and processes from completed economic analysis of LIBRE outputs.

Exploitation plan updated M32

Exploitation plan, to be updated over the lifetime of the project

Standards (Updated Annually)

Standards (Updated Annually). Delivery dates M12, M24, M36, M48.

Life Cycle Analysis results and interpretations from LIBRE process – carbon fiber

Recommendations for future work required and appropriate commercialisation of LIBRE technology from completed economic analysis of LIBRE outputs.

Exploitation plan tailored to the needs of individual partners (updated annually)

Exploitation plan tailored to the needs of individual partners (updated annually). Deadlines in M3, M15, M28, M40.

Recommendations for future work required and appropriate commercialisation of LIBRE technology from completed economic analysis of LIBRE outputs.

Recommendations for future work required and appropriate commercialisation of LIBRE technology from completed economic analysis of LIBRE outputs

Life Cycle Analysis results and interpretation from LIBRE process – composite products

Project Outcomes published in Peer-reviewed Journals
Recommendations for optimal routes to sustainable exploitation of LIBRE materials and processes from completed Life Cycle Analysis

Recommendations for optimal routes to sustainable exploitation of LIBRE materials and processes from completed Life Cycle Analysis.

Business Planning and Technical Exploitation group ratified

Business Planning and Technical Exploitation group ratified.

Standards (Updated M36)

Standards (Updated Annually). Delivery dates M12, M24, M36, M48.

IP assessment with partners and Dissemination Plan

IP assessment with partners and Dissemination Plan.

Publications

From Bio-Waste to Bio-Based. AD-Plasma Modifikation biobasierter Kohlenstoff-Fasern: Vortrag gehalten beim 37. ak-adp Workshop, 11.-12. November 2020, Leipzig

Auteurs: Ihde, Jörg
Publié dans: Fraunhofer IFAM, Numéro 1, 2020, ISSN 1439-6009
Éditeur: Fraunhofer-Publica

Allocation in life cycle assessment of lignin

Auteurs: Magdalena Svanström; Frida Hermansson; Mathias Janssen
Publié dans: International Journal of Life Cycle Assessment (0948-3349) vol.in press(2020), Numéro 1, 2020, ISSN 0948-3349
Éditeur: Springer Verlag
DOI: 10.1007/s11367-020-01770-4

Facile Tailoring of Structures for Controlled Release of Paracetamol from Sustainable Lignin Derived Platforms

Auteurs: Mario Culebras, Mahboubeh Pishnamazi, Gavin M. Walker, Maurice N. Collins
Publié dans: Molecules, Numéro 26/6, 2021, Page(s) 1593, ISSN 1420-3049
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/molecules26061593

Lignin Doped Carbon Nanotube Yarns for Improved Thermoelectric Efficiency

Auteurs: Mario Culebras, Guang Ren, Steward O'Connell, Juan J. Vilatela, Maurice N. Collins
Publié dans: Advanced Sustainable Systems, Numéro 4/11, 2020, Page(s) 2000147, ISSN 2366-7486
Éditeur: Wiley-VCH GmbH
DOI: 10.1002/adsu.202000147

Effect of Atmospheric Pressure Plasma Treatment of Glass Fibers on the Composite Strength of Endless Fiber-Reinforced Injection Molded Components

Auteurs: Tobias Gebken, Rüdiger Sachs, Markus Kühn, Jörg Ihde, Klaus Dröder, Ralph Wilken
Publié dans: Key Engineering Materials, Numéro 801, 2019, Page(s) 251-257, ISSN 1662-9795
Éditeur: Trans Tech Publications Ltd
DOI: 10.4028/www.scientific.net/kem.801.251

Treatment of Flax Fabric with AP-DBD in Parallel Plane Configuration

Auteurs: Rüdiger Sachs, Jörg Ihde, Ralph Wilken, Bernd Mayer
Publié dans: Plasma, Numéro 2/2, 2019, Page(s) 272-282, ISSN 2571-6182
Éditeur: MDPI
DOI: 10.3390/plasma2020019

Biobased Structurally Compatible Polymer Blends Based on Lignin and Thermoplastic Elastomer Polyurethane as Carbon Fiber Precursors

Auteurs: Mario Culebras, Anne Beaucamp, Yan Wang, Manuel M. Clauss, Erik Frank, Maurice N. Collins
Publié dans: ACS Sustainable Chemistry & Engineering, 2018, ISSN 2168-0485
Éditeur: American Chemical Society
DOI: 10.1021/acssuschemeng.8b01170

Thermoelectric properties of electrospun carbon nanofibres derived from lignin

Auteurs: Niall Dalton, Robert P. Lynch, Maurice N. Collins, Mario Culebras
Publié dans: International Journal of Biological Macromolecules, Numéro 121, 2019, Page(s) 472-479, ISSN 0141-8130
Éditeur: Elsevier BV
DOI: 10.1016/j.ijbiomac.2018.10.051

Understanding the thermal and dielectric response of organosolv and modified kraft lignin as a carbon fibre precursor

Auteurs: Mario Culebras, Maria J. Sanchis, Anne Beaucamp, Marta Carsí, Baljinder K. Kandola, A. Richard Horrocks, Gianmarco Panzetti, Colin Birkinshaw, Maurice N. Collins
Publié dans: Green Chemistry, Numéro 20/19, 2018, Page(s) 4461-4472, ISSN 1463-9262
Éditeur: Royal Society of Chemistry
DOI: 10.1039/c8gc01577e

Prospective study of lignin-based and recycled carbon fibers in composites through meta-analysis of life cycle assessments

Auteurs: Frida Hermansson, Matty Janssen, Magdalena Svanström
Publié dans: Journal of Cleaner Production, Numéro 223, 2019, Page(s) 946-956, ISSN 0959-6526
Éditeur: Elsevier BV
DOI: 10.1016/j.jclepro.2019.03.022

Valorization of lignin in polymer and composite systems for advanced engineering applications – A review

Auteurs: Maurice N. Collins, Mărioara Nechifor, Fulga Tanasă, Mădălina Zănoagă, Anne McLoughlin, Michał A. Stróżyk, Mario Culebras, Carmen-Alice Teacă
Publié dans: International Journal of Biological Macromolecules, Numéro 131, 2019, Page(s) 828-849, ISSN 0141-8130
Éditeur: Elsevier BV
DOI: 10.1016/j.ijbiomac.2019.03.069

Bio‐derived carbon nanofibers from lignin as high performance Li‐ion anode materials

Auteurs: Mario Culebras, Hugh Geaney, Anne Beaucamp, Prathviraj Upadhyaya, Eric Dalton, Kevin M Ryan[, Maurice N Collins
Publié dans: ChemSusChem, 2019, ISSN 1864-5631
Éditeur: Wiley - V C H Verlag GmbbH & Co.
DOI: 10.1002/cssc.201901562

Carbon fibres from renewable resources: the role of the lignin molecular structure in its blendability with biobased poly(ethylene terephthalate)

Auteurs: Anne Beaucamp, Yan Wang, Mario Culebras, Maurice N. Collins
Publié dans: Green Chemistry, 2019, ISSN 1463-9262
Éditeur: Royal Society of Chemistry
DOI: 10.1039/c9gc02041a

Biopolymer blends from hardwood lignin and bio-polyamides: Compatibility and miscibility

Auteurs: R. Muthuraj, M. Hajee, A.R. Horrocks, B.K. Kandola
Publié dans: International Journal of Biological Macromolecules, Numéro 132, 2019, Page(s) 439-450, ISSN 0141-8130
Éditeur: Elsevier BV
DOI: 10.1016/j.ijbiomac.2019.03.142

Exploring the role of lignin structure in molecular dynamics of lignin/bio-derived thermoplastic elastomer polyurethane blends

Auteurs: P. Ortiz-Serna, M. Carsí, M. Culebras, M.N. Collins, M.J. Sanchis
Publié dans: International Journal of Biological Macromolecules, Numéro 158, 2020, Page(s) 1369-1379, ISSN 0141-8130
Éditeur: Elsevier BV
DOI: 10.1016/j.ijbiomac.2020.04.261

Wood-Derived Hydrogels as a Platform for Drug-Release Systems

Auteurs: Mario Culebras, Anthony Barrett, Mahboubeh Pishnamazi, Gavin Michael Walker, Maurice N. Collins
Publié dans: ACS Sustainable Chemistry & Engineering, Numéro 9/6, 2021, Page(s) 2515-2522, ISSN 2168-0485
Éditeur: American Chemical Society
DOI: 10.1021/acssuschemeng.0c08022

Pre-treatment technologies of enhanced usage of fiber re-enforced polymers and future perspectives

Auteurs: Regula, Christoph; Ihde, Jörg; Tornow, Christian; Wübben, Thomas; Wilken, Ralph; Mayer, Bernd
Publié dans: Fraunhofer IFAM, Numéro 1, 2020, Page(s) 179-183
Éditeur: Fraunhofer-Publica

Livrables

Publications

Partager cette page

Télécharger