Resultado final
A brief description of the shaping techniques developed in the projects, their main drawbacks and potentials
Conditions for optimal drying process for MOF synthesis by spray-dryingThe report describe briefly the spray drying process forMOF synthesis, the conditions used and the main characteristica of the products formed
Description of shaping processes and shaped productsBrief report on the various shaping techniques developed in the project and the main characteristica of the shaped products
Optimization of spray-drying processes for high yield production of divalent MOFsA document describing briefly the spray drying process and the ways to optimize this towards high yield and high quality of the product
NPMs specification sheets for production quality control and recommendation for useThe report describe how a specification sheet following the various NPM products can look like and which data is should contain
Report on the synthesis of second generation MOF in water and in solvent with recyclingA brief report describing the main results and material properties of NPMs produced in water and with solvent recycling
Public report on the performances on shaped materials at laboratory scaleBrief report on the performance and physical properties of a selection of the shaped bodies prepared in the project
Report on the quality control of production processes at kg-scaleA report that describes the various techniques used to obtain physical and performance information abount NPM products to check their quality
Conditions for supercritical CO2 washingThe report describes the supercritical washing technique, the conditions used and the characteristica of the wasing process as compared to conventional techniques
A workshop will be arranged the third year
Delivery of a batch of 1st generation MOF (Fe-BTC) for shaping development (WP5) – 0.5kgPhysical proof that sample has been prepared incl main characterization data
Delivery of shaped productsProof that shaped products have been produced and their main characteristica are provided
Delivery of up to 10kg of NPMs by spray-dryingProof that the needed amount of NPMs have been påroduced and its characteristica are provided
Delivery of first samples for testing (WP1), post-synthesis treatments (WP2) and shaping development (WP5) – 0.1g-1kg scaleProof that sample has been prepared incl main characterisation data
Delivery of up to 5 kg MOFs by batch synthesisProof that the needed amount of MOFs have been produced by batch synthesis and the product characteristica is provided
Delivery of first samples of porous aluminosilicate for testing in WP1Proof that samples have been prapered and delivered for further processing
Delivery of up to 100kg of NPMs by mecanosynthesisProof that the needed amout of NPMs have been produced at the main characteristica is provided
Delivery of HKUST-1 for shaping development in WP5 – 0,5kg scaleProof that sample has been prepared incl main characteristica.
Delivery of up to 0.5kg MOFs by batch synthesisProof that the needed amout of MOFs have been produced and its characteristics are provided
A report describing briefly the performance of all selected NPMs for the four applications chosen
Proof that a prototype integrating the methane storage cylinder containg MOF is provided
Communication tools have been established and communicated
Publicaciones
Autores:
Marta Rubio-Martinez, Ceren Avci-Camur, Aaron W. Thornton, Inhar Imaz, Daniel Maspoch, Matthew R. Hill
Publicado en:
Chemical Society Reviews, Edición 46/11, 2017, Página(s) 3453-3480, ISSN 0306-0012
Editor:
Royal Society of Chemistry
DOI:
10.1039/c7cs00109f
Autores:
Giulia P. M. Bignami, Zachary H. Davis, Daniel M. Dawson, Samuel A. Morris, Samantha E. Russell, David McKay, Richard E. Parke, Dinu Iuga, Russell E. Morris, Sharon E. Ashbrook
Publicado en:
Chemical Science, Edición 9/4, 2018, Página(s) 850-859, ISSN 2041-6520
Editor:
Royal Society of Chemistry
DOI:
10.1039/C7SC04649A
Autores:
S. Hindocha, S. Poulston
Publicado en:
Faraday Discussions, Edición 201, 2017, Página(s) 113-125, ISSN 1359-6640
Editor:
Royal Society of Chemistry
DOI:
10.1039/c7fd00090a
Autores:
Francis Meunier
Publicado en:
Science, Edición 358/6366, 2017, Página(s) eaao0361, ISSN 0036-8075
Editor:
American Association for the Advancement of Science
DOI:
10.1126/science.aao0361
Autores:
Yoldes Khabzina, David Farrusseng
Publicado en:
Microporous and Mesoporous Materials, Edición 265, 2018, Página(s) 143-148, ISSN 1387-1811
Editor:
Elsevier BV
DOI:
10.1016/j.micromeso.2018.02.011
Autores:
Yoldes Khabzina, Jeremy Dhainaut, Matthias Ahlhelm, Hans-Juergen Richter, Helge Reinsch, Norbert Stock, David Farrusseng
Publicado en:
Industrial & Engineering Chemistry Research, Edición 57/24, 2018, Página(s) 8200-8208, ISSN 0888-5885
Editor:
American Chemical Society
DOI:
10.1021/acs.iecr.8b00808
Autores:
Ceren Avci-Camur, Javier Troyano, Javier Pérez-Carvajal, Alexandre Legrand, David Farrusseng, Inhar Imaz, Daniel Maspoch
Publicado en:
Green Chemistry, Edición 20/4, 2018, Página(s) 873-878, ISSN 1463-9262
Editor:
Royal Society of Chemistry
DOI:
10.1039/c7gc03132g
Autores:
Cesare Atzori, Greig C. Shearer, Lorenzo Maschio, Bartolomeo Civalleri, Francesca Bonino, Carlo Lamberti, Stian Svelle, Karl Petter Lillerud, Silvia Bordiga
Publicado en:
The Journal of Physical Chemistry C, 2017, ISSN 1932-7447
Editor:
American Chemical Society
DOI:
10.1021/acs.jpcc.7b00483
Autores:
Alexandre Legrand, Anton Pastushenko, Vladimir Lysenko, Alain Geloen, Elsje Alessandra Quadrelli, Jerome Canivet, David Farrusseng
Publicado en:
ChemNanoMat, Edición 2/9, 2016, Página(s) 866-872, ISSN 2199-692X
Editor:
Wiley-VCH Verlag GmbH & Co
DOI:
10.1002/cnma.201600124
Autores:
J. Dhainaut, C. Avci-Camur, J. Troyano, A. Legrand, J. Canivet, I. Imaz, D. Maspoch, H. Reinsch, D. Farrusseng
Publicado en:
CrystEngComm, 2017, ISSN 1466-8033
Editor:
Royal Society of Chemistry
DOI:
10.1039/C7CE00338B
Autores:
Luis Garzón-Tovar, Sabina Rodríguez-Hermida, Inhar Imaz and Daniel Maspoch
Publicado en:
J. Am. Chem. soc, 2017, ISSN 0002-7863
Editor:
American Chemical Society
DOI:
10.1021/jacs.6b11240
Autores:
Luis Garzón-Tovar, Javier Pérez-Carvajal, Inhar Imaz, Daniel Maspoch
Publicado en:
Advanced Functional Materials, Edición 27/21, 2017, Página(s) 1606424, ISSN 1616-301X
Editor:
John Wiley & Sons Ltd.
DOI:
10.1002/adfm.201606424
Autores:
Vincent Guillerm, Luis Garzón-Tovar, Amirali Yazdi, Inhar Imaz, Jordi Juanhuix, Daniel Maspoch
Publicado en:
Chemistry - A European Journal, Edición 23/28, 2017, Página(s) 6829-6835, ISSN 0947-6539
Editor:
John Wiley & Sons Ltd.
DOI:
10.1002/chem.201605507
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles