Industrial Thermal Energy Recovery Conversion and Management

Deliverables

Preparation of dissemination material
Launch website

Report on energy performance of TFC system
Report on estimation of energy, environmental and economic potential for heat recovery in EU28

Report on estimation of energy environmental and economic potential for heat recovery in EU28

Chemical and thermal characterization of the hot flue gas
Literature review of energy use and potential for heat recovery in the EU28
Coating protocols involving best practices
Case study material on successful application of heat recovery technologies
Report on the energy, economic and environmental performance of the technologies and market assessment

Report on the energy economic and environmental performance of the technologies and market assessment

Coating testing protocols
Evaluation report: monitoring data from demo sites and validation of EINSTEIN predictions

Evaluation report monitoring data from demo sites and validation of EINSTEIN predictions

Report on energy performance of sCO2 system
Report on operating environment of FHPS
Evaluation of the coatings properties and performance (incl. wetting, corrosion etc)

Evaluation of the coatings properties and performance incl wetting corrosion etc

Data management and open access strategy
Report on barriers and recommendations on how to overcome them
Database of papers and journals related to coatings

General demonstration functionality of EINSTEIN

upgraded software release with increased userfriendly capabilities in terms of installation manual examples the deliverable will contain specific sections to address the comments on D33 and D34 during the RP2 review additional content will relate to the installation and operating manual of the software and some examples on the IThERM demonstration cases as well as the solution of the case studies provided by the experts

Publications

Transient analysis and control of a heat to power conversion unit based on a simple regenerative supercritical CO2 Joule-Brayton cycle

Author(s): Matteo Marchionni, Giuseppe Bianchi, Savvas A. Tassou
Published in: Applied Thermal Engineering, Issue 183, 2021, Page(s) 116214, ISSN 1359-4311
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.applthermaleng.2020.116214

Adoption of Waste Heat Recovery Technologies: Reviewing the Relevant Barriers and Recommendations on How to Overcome Them

Author(s): Paul Christodoulides, Lazaros Aresti, Gregoris P. Panayiotou, Savvas Tassou, Georgios A. Florides
Published in: Operations Research Forum, 2022, Page(s) Article number: 3, ISSN 2662-2556
Publisher: Springer
DOI: 10.1007/s43069-021-00108-6

Waste Heat Recovery Technologies Revisited with Emphasis on New Solutions, Including Heat Pipes, and Case Studies

Author(s): Paul Christodoulides; Rafaela Agathokleous; Lazaros Aresti; Soteris A. Kalogirou; Savvas A. Tassou; Georgios A. Florides
Published in: Energies, Vol 15, Iss 384, p 384 (2022), 2022, ISSN 1996-1073
Publisher: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en15010384

Performance Analysis of Heat Exchangers and Integrated Supercritical CO2 Brayton Cycle for Varying Heat Carrier, Cooling and Working Fluid Flow Rates

Author(s): Lei Chai, Savvas A Tassou
Published in: Heat Transfer Engineering, 2022, ISSN 1521-0537
Publisher: Taylor and Francis
DOI: 10.1080/01457632.2022.2140640

A REVIEW OF HEAT TRANSFER OF CO2 AT SUPERCRITICAL PRESSURE IN THE CRITICAL AND PSEUDO-CRITICAL REGION

Author(s): Chai L, Tassou S A
Published in: Journal of Enhanced Heat Transfer, 2022, Page(s) Volume 29, Issue 4, 2022, pp. 1-40, ISSN 1563-5074
Publisher: Begell Digital Portal
DOI: 10.1615/jenhheattransf.2022041468

Overview and outlook of research and innovation in energy systems with carbon dioxide as the working fluid

Author(s): Giuseppe Bianchi; Giorgio Besagni; Savvas A. Tassou; Christos N. Markides
Published in: Applied Thermal Engineering, 2021, ISSN 1359-4311
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.applthermaleng.2021.117180

Review of supercritical CO 2 technologies and systems for power generation

Author(s): Martin T. White, Giuseppe Bianchi, Lei Chai, Savvas A. Tassou, Abdulnaser I. Sayma
Published in: Applied Thermal Engineering, Issue 185, 2021, Page(s) 116447, ISSN 1359-4311
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.applthermaleng.2020.116447

One-Dimensional Modelling of a Trilateral Flash Cycle System with Two-Phase Twin-Screw Expanders for Industrial Low-Grade Heat to Power Conversion

Author(s): Giuseppe Bianchi, Matteo Marchionni, Stuart Kennedy, Jeremy Miller, Savvas Tassou
Published in: 4th Forum on CFD in Positive Displacement Machines, 2019, ISSN 2504-3900
Publisher: MDPI
DOI: 10.3390/designs3030041

Recent Progress on High Temperature and High Pressure Heat Exchangers for Supercritical CO2 Power Generation and Conversion Systems

Author(s): Lei Chai, Savvas A Tassou
Published in: Heat Transfer Engineering, 2023, ISSN 1521-0537
Publisher: Taylor and Francis
DOI: 10.1080/01457632.2022.2164683

Evaluation of Zn- and Fe- rich organic coatings for corrosion protection and condensation performance on waste heat recovery surfaces

Author(s): Pavlos K. Pandis; Stamatoula Papaioannou; Vasileios Siaperas; Antypas Terzopoulos; Vassilis N. Stathopoulos
Published in: International Journal of Thermofluids, Issue Volumes 3–4, May 2020, 100025, 2020, ISSN 2666-2027
Publisher: Elsevier
DOI: 10.1016/j.ijft.2020.100025

Preliminary assessment of waste heat potential in major European industries

Author(s): Gregoris P. Panayiotou, Giuseppe Bianchi, Giorgos Georgiou, Lazaros Aresti, Maria Argyrou, Rafaela Agathokleous, Konstantinos M. Tsamos, Savvas A. Tassou, Georgios Florides, Soteris Kalogirou, Paul Christodoulides
Published in: Energy Procedia, Issue 123, 2017, Page(s) 335-345, ISSN 1876-6102
Publisher: Elsevier
DOI: 10.1016/j.egypro.2017.07.263

Techno-economic comparison of different cycle architectures for high temperature waste heat to power conversion systems using CO 2 in supercritical phase

Author(s): Matteo Marchionni, Giuseppe Bianchi, Konstantinos M. Tsamos, Savvas A. Tassou
Published in: Energy Procedia, Issue 123, 2017, Page(s) 305-312, ISSN 1876-6102
Publisher: Elsevier
DOI: 10.1016/j.egypro.2017.07.253

Two-phase chamber modeling of a twin-screw expander for Trilateral Flash Cycle applications

Author(s): Giuseppe Bianchi, Stuart Kennedy, Obadah Zaher, Savvas A. Tassou, Jeremy Miller, Hussam Jouhara
Published in: Energy Procedia, Issue 129, 2017, Page(s) 347-354, ISSN 1876-6102
Publisher: Elsevier
DOI: 10.1016/j.egypro.2017.09.208

Design of radial turbomachinery for supercritical CO 2 systems using theoretical and numerical CFD methodologies

Author(s): Norman Holaind, Giuseppe Bianchi, Maxence De Miol, Samira Sayad Saravi, Savvas A. Tassou, Arthur Leroux, Hussam Jouhara
Published in: Energy Procedia, Issue 123, 2017, Page(s) 313-320, ISSN 1876-6102
Publisher: Elsevier
DOI: 10.1016/j.egypro.2017.07.256

Techno-economic survey and design of a pilot test rig for a trilateral flash cycle system in a steel production plant

Author(s): Rebecca McGinty, Giuseppe Bianchi, Obadah Zaher, Steven Woolass, David Oliver, Christopher Williams, Jeremy Miller
Published in: Energy Procedia, Issue 123, 2017, Page(s) 281-288, ISSN 1876-6102
Publisher: Elsevier
DOI: 10.1016/j.egypro.2017.07.242

Experimental investigation on a flat heat pipe heat exchanger for waste heat recovery in steel industry

Author(s): Hussam Jouhara, Sulaiman Almahmoud, Amisha Chauhan, Bertrand Delpech, Theodora Nannou, Savvas A. Tassou, Rocio Llera, Francisco Lago, Juan José Arribas
Published in: Energy Procedia, Issue 123, 2017, Page(s) 329-334, ISSN 1876-6102
Publisher: Elsevier
DOI: 10.1016/j.egypro.2017.07.262

Experimental and theoretical investigation of a flat heat pipe heat exchanger for waste heat recovery in the steel industry

Author(s): Hussam Jouhara, Sulaiman Almahmoud, Amisha Chauhan, Bertrand Delpech, Giuseppe Bianchi, Savvas A. Tassou, Rocio Llera, Francisco Lago, Juan José Arribas
Published in: Energy, Issue 141, 2017, Page(s) 1928-1939, ISSN 0360-5442
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.energy.2017.10.142

Numerical modelling of a two-phase twin-screw expander for Trilateral Flash Cycle applications

Author(s): Giuseppe Bianchi, Stuart Kennedy, Obadah Zaher, Savvas A. Tassou, Jeremy Miller, Hussam Jouhara
Published in: International Journal of Refrigeration, 2018, ISSN 0140-7007
Publisher: Elsevier BV
DOI: 10.1016/j.ijrefrig.2018.02.001

Techno-economic assessment of Joule-Brayton cycle architectures for heat to power conversion from high-grade heat sources using CO 2 in the supercritical state

Author(s): Matteo Marchionni, Giuseppe Bianchi, Savvas A. Tassou
Published in: Energy, Issue 148, 2018, Page(s) 1140-1152, ISSN 0360-5442
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.energy.2018.02.005

Droplet Mobility Manipulation on Porous Media Using Backpressure

Author(s): N. Vourdas, G. Pashos, G. Kokkoris, A. G. Boudouvis, V. N. Stathopoulos
Published in: Langmuir, Issue 32/21, 2016, Page(s) 5250-5258, ISSN 0743-7463
Publisher: American Chemical Society
DOI: 10.1021/acs.langmuir.6b00900

Numerical investigations of a Trilateral Flash Cycle under system off-design operating conditions

Author(s): Matteo Marchionni, Giuseppe Bianchi, Savvas A. Tassou, Obadah Zaher, Jeremy Miller
Published in: Energy Procedia, Issue 161, 2019, Page(s) 464-471, ISSN 1876-6102
Publisher: Elsevier
DOI: 10.1016/j.egypro.2019.02.070

Numerical modelling and performance maps of a printed circuit heat exchanger for use as recuperator in supercritical CO2 power cycles

Author(s): Matteo Marchionni, Lei Chai, Giuseppe Bianchi, Savvas A. Tassou
Published in: Energy Procedia, Issue 161, 2019, Page(s) 472-479, ISSN 1876-6102
Publisher: Elsevier
DOI: 10.1016/j.egypro.2019.02.068

Waste Heat Recovery in the EU industry and proposed new technologies

Author(s): Rafaela Agathokleous, Giuseppe Bianchi, Gregoris Panayiotou, Lazaros Arestia, Maria C. Argyrou, Giorgos S. Georgiou, Savvas A. Tassou, Hussam Jouhara, Soteris A. Kalogirou, Georgios A. Florides, Paul Christodoulides
Published in: Energy Procedia, Issue 161, 2019, Page(s) 489-496, ISSN 1876-6102
Publisher: Elsevier
DOI: 10.1016/j.egypro.2019.02.064

Design of a high-temperature heat to power conversion facility for testing supercritical CO2 equipment and packaged power units

Author(s): Giuseppe Bianchi, Samira S. Saravi, Romain Loeb, Konstantinos M. Tsamos, Matteo Marchionni, Arthur Leroux, Savvas A. Tassou
Published in: Energy Procedia, Issue 161, 2019, Page(s) 421-428, ISSN 1876-6102
Publisher: Elsevier
DOI: 10.1016/j.egypro.2019.02.109

Design criteria for coatings in next generation condensing economizers

Author(s): Nikolaos Vourdas, Hussam Jouhara, Savvas A. Tassou, Vassilis N. Stathopoulos
Published in: Energy Procedia, Issue 161, 2019, Page(s) 412-420, ISSN 1876-6102
Publisher: Elsevier
DOI: 10.1016/j.egypro.2019.02.095

Effect of cross-section geometry on the thermohydraulic characteristics of supercritical CO2 in minichannels

Author(s): Lei Chai, Savvas A Tassou
Published in: Energy Procedia, Issue 161, 2019, Page(s) 446-453, ISSN 1876-6102
Publisher: Elsevier
DOI: 10.1016/j.egypro.2019.02.077

Numerical study of the thermohydraulic performance of printed circuit heat exchangers for supercritical CO2 Brayton cycle applications

Author(s): Lei Chai, Savvas A Tassou
Published in: Energy Procedia, Issue 161, 2019, Page(s) 480-488, ISSN 1876-6102
Publisher: Elsevier
DOI: 10.1016/j.egypro.2019.02.066

A Review of Airside Heat Transfer Augmentation with Vortex Generators on Heat Transfer Surface

Author(s): Lei Chai, Savvas Tassou
Published in: Energies, Issue 11/10, 2018, Page(s) 2737, ISSN 1996-1073
Publisher: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en11102737

Evaluation of organic coatings for corrosion protection of condensing economizers

Author(s): I. Iliopoulos, A. Karampekios, P.K. Pandis, N. Vourdas, H. Jouhara, S. Tassou, V.N. Stathopoulos
Published in: Procedia Structural Integrity, Issue 10, 2018, Page(s) 295-302, ISSN 2452-3216
Publisher: Elsevier
DOI: 10.1016/j.prostr.2018.09.041

Numerical modelling and transient analysis of a printed circuit heat exchanger used as recuperator for supercritical CO2 heat to power conversion systems

Author(s): Matteo Marchionni, Lei Chai, Giuseppe Bianchi, Savvas A. Tassou
Published in: Applied Thermal Engineering, Issue 161, 2019, Page(s) 114190, ISSN 1359-4311
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.applthermaleng.2019.114190

Review of supercritical carbon dioxide (sCO2) technologies for high-grade waste heat to power conversion

Author(s): Matteo Marchionni, Giuseppe Bianchi, Savvas A. Tassou
Published in: SN Applied Sciences, Issue 2/4, 2020, ISSN 2523-3963
Publisher: Springer Nature
DOI: 10.1007/s42452-020-2116-6

Modelling and off-design performance optimisation of a trilateral flash cycle system using two-phase twin-screw expanders with variable built-in volume ratio

Author(s): Giuseppe Bianchi, Matteo Marchionni, Jeremy Miller, Savvas A. Tassou
Published in: Applied Thermal Engineering, Issue 179, 2020, Page(s) 115671, ISSN 1359-4311
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.applthermaleng.2020.115671

Modeling and Evaluation of the Thermohydraulic Performance of Compact Recuperative Heat Exchangers in Supercritical Carbon Dioxide Waste Heat to Power Conversion Systems

Author(s): Lei Chai, Savvas a Tassou
Published in: Heat Transfer Engineering, 2021, Page(s) 1067-1082, ISSN 1521-0537
Publisher: Taylor and Francis
DOI: 10.1080/01457632.2021.1943833

A Review of Airside Heat Transfer Augmentation with Vortex Generators on Heat Transfer Surface

Author(s): Lei Chai; Savvas A. Tassou
Published in: Energies, Vol 11, Iss 10, p 2737 (2018), 2018, ISSN 1996-1073
Publisher: Multidisciplinary Digital Publishing Institute (MDPI)

Inventory control assessment for small scale sCO2 heat to power conversion systems

Author(s): Matteo Marchionni; Muhammad Usman; Lei Chai; Savvas A. Tassou
Published in: Energy, Issue Volume 267, 15 March 2023, 126537, 2023, ISSN 0360-5442
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.energy.2022.126537

Numerical investigation of a simple regenerative heat to power system with coupled or independent turbomachinery drives

Author(s): Matteo Marchionni, Giuseppe Bianchi, Muhammad Usman, Apostolos Pesyridis, Savvas A. Tassou
Published in: 4th European sCO2 Conference for Energy Systems, 2021
Publisher: University of Duisburg-Essen
DOI: 10.17185/duepublico/73949

Industrial Thermal Energy Recovery and Management (I-ThERM)

Author(s): Savvas A. Tassou
Published in: Industry Day of the Institute of Energy Futures, 2016
Publisher: Brunel University London

Organic Rankine Cycle Systems for Low Temperature Heat to Power Generation

Author(s): Arthur Leroux
Published in: Industry Day of the Institute of Energy Futures, 2016
Publisher: Brunel University London

Innovations in Low Temperature Heat to Power Generation

Author(s): Jeremy Miller
Published in: Industry Day of the Institute of Energy Futures, 2016
Publisher: Brunel University London

Heat Exchangers for Industrial Heat Recovery

Author(s): Hussam Jouhara
Published in: Industry Day of the Institute of Energy Futures, 2016
Publisher: Brunel University London

Design considerations on a small scale supercritical CO2 power system for industrial high temperature waste heat to power recovery applications

Author(s): Giuseppe Bianchi, Savvas A. Tassou, Yunting Ge, Hussam Jouhara, Konstantinos Tsamos, Arthur Leroux, Maxence de Miol
Published in: 1st European Seminar on Supercritical CO2 (sCO2) Power Systems, 2016
Publisher: TU Wien

Coatings for High Temperature Exhaust Heat Recovery Heat Exchangers

Author(s): Vassilis Stathopoulos
Published in: Industry Day of the Institute of Energy Futures, 2016
Publisher: Brunel University London

Design of a single-shaft compressor, generator, turbine for small-scale supercritical CO2 systems for waste heat to power conversion applications

Author(s): De Miol, Maxence, Bianchi, Giuseppe, Henry, Gabriel, Holaind, Norman, Tassou, Savvas A., Leroux, Arthur
Published in: 2nd European sCO2 Conference 2018, 2018
Publisher: Universität Duisburg-Essen
DOI: 10.17185/duepublico/46086

Modelling and performance analysis of a supercritical CO2 system for high temperature industrial heat to power conversion at off-design conditions

Author(s): Marchionni, Matteo; Saravi, Samira Sayad; Bianchi, Giuseppe; Tassou, Savvas
Published in: 3rd European supercritical CO2 Conference, 2019, Page(s) 281-289
Publisher: Universität Duisburg-Essen
DOI: 10.17185/duepublico/48908

Modelling and performance analysis of heat exchangers for supercritical CO2 power system

Author(s): Lei Chai, Savvas Tassou
Published in: 5th Sustainable Thermal Energy Management International Conference (SusTEM2019), 2019
Publisher: SusTEM2019

Modelling and Evaluation of the Thermohydraulic Performance of Finned-Tube Supercritical Carbon Dioxide Gas Coolers

Author(s): Lei Chai, Konstantinos M. Tsamos, Savvas A. Tassou
Published in: 16th UK Heat Transfer Conference (UKHTC2019), 2019
Publisher: UKHTC2019

Dynamics of SCO2 heat to power units equipped with dual tank inventory control system

Author(s): Matteo Marchionni, Giuseppe Bianchi, Savvas A Tassou
Published in: Proceedings of the 6th International Seminoar on ORC Power Systems, 2021, ISBN 978-3-00-070686-8
Publisher: Technical University of Munich
DOI: 10.14459/2021mp1633135

Modelling and Evaluation of the Thermohydraulic Performance of Finned-Tube Supercritical Carbon Dioxide Gas Coolers

Author(s): Lei Chai; Konstantinos M. Tsamos; Savvas A. Tassou
Published in: Energies, Vol 13, Iss 5, p 1031 (2020), 2020, ISSN 1996-1073
Publisher: Energies
DOI: 10.3390/en13051031

Design considerations on a small scale supercritical CO2 power system for industrial high temperature waste heat to power recovery applications

Estimating the waste heat recovery in the European Union Industry

Author(s): Giuseppe Bianchi, Gregoris P. Panayiotou, Lazaros Aresti, Soteris A. Kalogirou, Georgios A. Florides, Kostantinos Tsamos, Savvas A. Tassou, Paul Christodoulides
Published in: Energy, Ecology and Environment, 2019, ISSN 2363-7692
Publisher: Springer Nature
DOI: 10.1007/s40974-019-00132-7

Intellectual Property Rights

Heat engine

Application/Publication number: PCT/EP 2018/078376
Date: 2018-10-17
Applicant(s): SPIRAX-SARCO LIMITED

Heat engine

Application/Publication number: GB 171765.1
Date: 2017-10-20
Applicant(s): SPIRAX-SARCO LIMITED

Searching for OpenAIRE data...

Deliverables

Publications

Intellectual Property Rights

Share this page

Download