Rezultaty
The measurement set-ups will be installed at the institutes having EMF equipment available (i.e. FRAUNHOFER, BWI, and INNOVALTECH). A short documentation of the setup will be provided describing the setup, the working principle and exemplary measurement results proving the functionality.
Realisation of the joined partsJoined parts will be available at FRAUNHOFER, BWI, and INNOVALTECH. Exemplary results of the joint tests will be included in the reports provided in D2.3 to D2.14. This will also serve as proof for having achieved D2.2.
D7.1 is a report on the current state of the standards related to the industrial implementation of the JOIN’EM technology/process
Report on testing of tools for EMWD4.4 will be subdivided into two major parts: the first one serves as documentation of the results of the lifetime investigations carried out on specific specimens in order to get more general information about the material. The second one documents the results of the functionality and durability tests performed on the complete tool. Thereby, the functionality is proved on the basis of exemplary (successful) joining results. The durability tests include documentation about the tool loading in relation to observed changes as cracking, deformations, or flashovers.
Report on the benchmarking study: developed demonstrator with connections of sheet metal parts for cooling and heating applications compared to the state-of-the-art productsD6.6 documents the performance of the demonstrator with connections of sheet metal parts for cooling and heating applications. This concerns especially the results of specific tests usually performed in production. This performance is compared to the performance of the state of the art solution in order to clearly document advantages and disadvantages of the innovation.
Synthesis report regarding the corrosion analysisD5.2 summarises the description and the most important results of the corrosion analysis. Corrosion testing by salt spray testing and immersion testing will be contained as well as a comparison of mechanical joint properties after being exposed to a corrosive environment.
Report on the life cycle assessmentD7.4 gives a detailed description of the Life-Cycle-Analysis of the demonstrators produced with help of EMW. It will describe the environmental impacts obtained by EMW compared to conventional (i.e. thermal) joining, due to the absence of heat, radiation, gas or smoke, low energy consumption, and the absence of lubricants, additives or filler materials, etc. For a quantitative evaluation of the LCA especially the data determined for the state of the art solution in WP1 is relevant. It will serve as a direct comparison.
Report on the benchmarking study: developed demonstrator with connections of sheet metal parts for electrical applications compared to the state-of-the-art productsD6.7 documents the performance of the demonstrator with connections of tubular parts for electrical applications. This concerns especially the results of specific tests usually performed in production. This performance is compared to the performance of the state of the art solution in order to clearly document advantages and disadvantages of the innovation.
Report on the benchmarking study: developed demonstrator with connections of tubular parts for cooling and heating applications compared to the state-of-the-art productsD6.5 documents the performance of the demonstrator with connections of tubular parts for cooling and heating applications. This concerns especially the results of specific tests usually performed in production. This performance is compared to the performance of the state of the art solution in order to clearly document advantages and disadvantages of the innovation.
Report with specifications of the joint characterisation methods for the defined joint typesD5.1 summarises the results of the evaluation of different testing methods for characterising joints produced by EMW. Destructive as well as non-destructive testing methods will be considered and advice regarding the most appropriate testing methods to quantify the joint performance will be contained.
Report on numerical lifetime prediction method for EMW equipmentA description of the modelling approach used for numerical lifetime prediction in the project is given in form of a report. Thereby, specific aspects to be taken into account when modelling the durability of tools for EMW processes are described.
Report on technological feasibility of EMW for all suggested material combinationsWithin D2.5 it the possibilities of joining by EMW will be proved for all material combinations chosen for investigation within this project. A list with suitable parameters and conditions for achieving a satisfying joining result will be provided.
Standardisation recommendation documentA document with standardisation recommendations, based on the results of the JOIN’EM project, to be disseminated through the Joining Standardisation National Contact points and CEN.
For organising and carrying out a number of training/dissemination workshops, a set of materials, like training manuals and guidelines will be developed and prepared. A database of videos and photos will also be created, with the assistance of all partners, to facilitate training. Documentation of workshops carried out will be done via submitting the agenda and the list of participants.
Project specific websiteDesign and creation of a project website presenting the importance and the benefits of the conversion to the new processes based on a number of examples and case studies. This website will act as an information repository regarding the developments, for the public, but also for EC members. It will be linked to social websites (LinkedIn, YouTube), allowing users to participate in the main discussions regarding the project results, while rising the interest in the project’s outcomes.
Publikacje
Autorzy:
K. Macocco, C. Scheffler, A. Deldicque
Opublikowane w:
CSMA 2017 13ème Colloque National en Calcul des Structures, Numer every 2 years, 2017, Strona(/y) 8
Wydawca:
CSMA 2017
Autorzy:
Deldicque, Amaury; Ghorbel, I.
Opublikowane w:
23ème Congrès Français de Mécanique, 2017
Wydawca:
AFM, Association Française de Mécanique
Autorzy:
Verena Psyk, Christian Scheffler, Maik Linnemann, Dirk Landgrebe
Opublikowane w:
AIP Conference Proceedings volume 1892, 2017, Strona(/y) 110001
Wydawca:
Author(s)
DOI:
10.1063/1.5008128
Autorzy:
K. Faes, I. Kwee
Opublikowane w:
7th International Conference on High Speed Forming, April 27th-28th 2016, Dortmund, Germany, 2016, Strona(/y) 299-308
Wydawca:
Tekkaya, A. E.; Kleiner, M.
Autorzy:
Verena Psyk, Christian Scheffler, Maik Linnemann, Dirk Landgrebe
Opublikowane w:
23. Sächsische Fachtagung Umformtechnik - Den Eigenschaften Form Geben, 2016, Strona(/y) 174-183, ISBN 978-3-86780-503-2
Wydawca:
Prof. Dr.-Ing. Alexander Brosium
Autorzy:
Yang Liu, Ilya Straumit, Dmytro Vasiukov, Stepan V. Lomov, Stéphane Panier
Opublikowane w:
Composite Structures, Numer 179, 2017, Strona(/y) 568-579, ISSN 0263-8223
Wydawca:
Elsevier BV
DOI:
10.1016/j.compstruct.2017.07.066
Autorzy:
Verena Psyk, Christian Scheffler, Maik Linnemann, Dirk Landgrebe
Opublikowane w:
Procedia Engineering, Numer 207, 2017, Strona(/y) 353-358, ISSN 1877-7058
Wydawca:
Elsevir
DOI:
10.1016/j.proeng.2017.10.787
Autorzy:
Verena Psyk, Maik Linnemann, Christian Scheffler, Petr Kurka, Dirk Landgrebe
Opublikowane w:
MATEC Web of Conferences, Numer 190, 2018, Strona(/y) 02004, ISSN 2261-236X
Wydawca:
Frank Vollertsen
DOI:
10.1051/matecconf/201819002004
Autorzy:
Irene Kwee, Verena Psyk, Koen Faes
Opublikowane w:
World Journal of Engineering and Technology, 2016, Strona(/y) 538-561, ISSN 2331-4249
Wydawca:
Scientific Research Publishing Inc.
DOI:
10.4236/wjet.2016.44053
Autorzy:
Wim Demonie, Koen Faes, Wim De Waele
Opublikowane w:
International Journal Sustainable Construction & Design, 2016, ISSN 2032-7471
Wydawca:
Journal of Sustainable Construction and Design
Autorzy:
I. Kwee, K. Faes
Opublikowane w:
Key Engineering Materials, 2016, Strona(/y) 109-114, ISSN 1662-9795
Wydawca:
Trans Tech Publications Ltd.
DOI:
10.4028/www.scientific.net/KEM.710.109
Autorzy:
Simoen B., Faes K., De Waele W.
Opublikowane w:
International Journal Sustainable Construction & Design, 2017, ISSN 2032-7471
Wydawca:
Laboratory Soete - Ghent University
Autorzy:
Roeygens L., Faes K., De Waele W.
Opublikowane w:
International Journal Sustainable Construction & Design, 2017, ISSN 2032-7471
Wydawca:
Laboratory Soete - Ghent University
Autorzy:
door Irene Kwee en Koen Faes
Opublikowane w:
LASTECHNIEK, 2017, ISSN 0023-8694
Wydawca:
LASTECHNIEK
Autorzy:
Verena Psyk, Maik Linnemann und Christian Scheffler / Peter Königsreuther
Opublikowane w:
Maschinenmarkt, 2016, Strona(/y) 62-65, ISSN 2199-2657
Wydawca:
Vogel Business Media GmbH & Co.KG
Wyszukiwanie danych OpenAIRE...
Podczas wyszukiwania danych OpenAIRE wystąpił błąd
Brak wyników