Development of a new technology for production of Skeletons in composite materials for realization of pre-cast tunnel segments.

Projektinformationen

COMPOSKE

ID Finanzhilfevereinbarung: 672267

DOI 10.3030/672267

Projekt abgeschlossen

EK-Unterschriftsdatum 19 Juni 2015

Startdatum 1 Juli 2015

Enddatum 30 Juni 2017

Finanziert unter

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies – Nanotechnologies

Gesamtkosten € 1 133 562,50

EU-Beitrag € 793 493,75

Koordiniert durch

ATP SRL
Italy

Ziel

The objective of this project is to develop products and technology to substitute traditional steel reinforcement with GFRP (glassfiber reinforced) bars in precast tunnel segments. Precast segments are traditionally used for the lining of tunnels excavated with a Tunnel Boring Machine (TBM), and the use of fiberglass reinforcement in tunnel segments allows several advantages, mainly related to the durability aspects (no corrosion). In particular, it is of great interest the possibility to reduce the concrete cover that is usually a weak point for this kind of structure (concrete cover can crash during handling or due to TBM thrusts). Furthermore, the use of fiberglass bars is suitable in tunnel where the aspect cycle life is equal or higher than 100 years and in the part of the tunnel that have to be eventually removed, typical problem in TBM tunnel: in this case, segments reinforced with GFRP bars can easily demolish and disposed. Finally, the use of this technology is suitable for create dielectric joint in the tunnel.
At the end of the project precast segment made by GFRP reinforcements will be introduced in the market and a new guideline for projecting with such elements will be available and a new technology for the production will be performed.
The main market sector, the new product is addressed to, is Railway, Metro and Highway tunnel construction.
The concept and objectives for the project fit into the overall plan to reach the market: ATP has been active since many years in supplying GFRP armor (traditional skeleton made by straight bar and stirrup) in the tunnel infrastructure (Railway, Highway and Metro Tunnels) and the idea for the new product grows out on the base of a need coming directly from job site, and it will represent a natural (and significant) expansion of the actual market.
The project intends to develop something new to Europe that addresses EU-wide challenges.

Wissenschaftliches Gebiet

• engineering and technology › materials engineering › composites
• natural sciences › computer and information sciences › data science › data processing

Programm/Programme

• H2020-EU.2.1.2. - INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies – Nanotechnologies Main Programme
• H2020-EU.2.3.1. - Mainstreaming SME support, especially through a dedicated instrument

Thema/Themen

• NMP-25-2014 - Accelerating the uptake of nanotechnologies, advanced materials or advanced manufacturing and processing technologies by SMEs

Aufforderung zur Vorschlagseinreichung

H2020-SMEInst-2014-2015

Andere Projekte für diesen Aufruf anzeigen

Unterauftrag

H2020-SMEINST-2-2014

Finanzierungsplan

SME-2 - SME instrument phase 2

Koordinator

ATP SRL

• Netto-EU-Beitrag: € 793 493,75
• Adresse: VIA CASA PAGANO 31 ; 84012 ANGRI ; Italien
• KMU Die Organisation definierte sich zum Zeitpunkt der Unterzeichnung der Finanzhilfevereinbarung selbst als KMU (Kleine und mittlere Unternehmen). Ja:
  Region
  Sud › Campania › Salerno
• Region: Sud › Campania › Salerno
• Aktivitätstyp: Private for-profit entities (excluding Higher or Secondary Education Establishments)
• Gesamtkosten: € 1 133 562,50