Skip to main content
European Commission logo
English English
CORDIS - EU research results
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

Smart Technologies for the Conversion of Industrial Lignins into Sustainable Materials

Deliverables

Guidance report to R&D policy makers and recommendations for standardisation

Instead of a routine techno-economic study, a diffusion path analysis will made for the newly developed processes and products. The analysis aims at the identification of barriers and incentives that will influence the success rate of new products and technologies. In context of the development of knowledge-based bio-economies this is especially useful assessing key topics like recommendations for the standardisation of the developed bio-chemicals and materials in order to facilitate the market uptake of the developed products or a detailed comparison of materials (e.g. value-performance-relations).

Publications

Aqueous acetone fractionation of kraft, organosolv and soda lignins

Author(s): Domínguez-Robles, J., Tamminen, T., Liitiä, T., Peresin, M.S., Rodríguez, A., Jääskeläinen, A.-S.
Published in: Nordic Wood Biorefinery Conference, Issue March, 2017, 2017
Publisher: Nordic Wood Biorefinery Conference

Potential deconstruction of recycled wood, structural features of isolated lignin and ways to activate it for material applications.

Author(s): Schmiedl, D., Graf, J., Tübke, B., Liitiä, T., Jääskeläinen, A.-S., Siika-aho, M.,
Published in: 5th International Conference on Green Chemistry and Technology, Issue July 24-26, 2017, 2017
Publisher: 5th International Conference on Green Chemistry and Technology

Lignin fractionation - a method to preprocess lignin for high value applications

Author(s): Jääskeläinen, A,-S., Liitiä, T., Tamminen, T.
Published in: The 11th Biennal Johan Gullichsen Colloquium, Issue November 8, 2017, 2017, Page(s) 23-26
Publisher: Puunjalosusinsinöörit - Forest Products Engineers

Lignin as a functional component in thermoplastic products

Author(s): Liitiä, T., Immonen, K., Laine, C., Ropponen, J., Willberg-Keyriläinen, P., Wikberg, H., Jääskeläinen, A.-S., Tamminen, T.
Published in: 19th International Symposium on Wood, Fibre and Pulping Chemistry, Issue August 30-September 1, 2017, 2017
Publisher: 19th International Symposium on Wood, Fibre and Pulping Chemistry

Integrated market orientation in technical R&D processes - opportunities and challenges for environmentally friendly bio-based resins

Author(s): Lettner, M., Hesser, F.
Published in: 8th International Conference on Life Cycle Management LCM 2017, 2017
Publisher: 8th International Conference on Life Cycle Management LCM 2017

How does the molecular weight of kraft lignin influence the bonding strength of lignin based phenol formaldehyde resins?

Author(s): Solt, P., Lingenfelter, P., Konnerth, J., van Herwijnen, H. W. G.
Published in: IPPS (International Panel Products Symposium), 2017
Publisher: IPPS (International Panel Products Symposium)

Accompanying innovation process of lignin based products - Life Cycle assessment in line with technology readiness level

Author(s): Lettner, M., Hesser, F.
Published in: AVNIR - Conference Life Cycle in Practice, 2017
Publisher: AVNIR - Conference Life Cycle in Practice

The Impact of Molecular Weight of Kraft-lignin on Adhesive Performance of Lignin Based Phenol Formaldehyde Resins

Author(s): Solt, P., Lingenfelter, P., Konnerth, J., van Herwijnen, H. W. G.
Published in: 11th International Conference of Wood Adhesives, 2017
Publisher: 11th International Conference of Wood Adhesives

Einfluss der Molmasse von Lignin auf die Bindefestigkeit von LPF-Harzen

Author(s): Solt, P., Konnerth, J., van Herwijnen, H. W. G.
Published in: Holzwerkstoff Kolloquium, 2017
Publisher: Holzwerkstoff Kolloquium

The influence of lignin properties on the performance of lignin-phenolic adhesives

Author(s): Solt, P., Ghorbani, M., Konnerth, J., Liebner, F., van Herwijnen, H. W. G.
Published in: 17th Austrian Chemistry Days, 2017, Page(s) p. 91-96
Publisher: 17th Austrian Chemistry Days

Aqueous solvent fractionation of kraft lignin - technoeconomical perspective

Author(s): Leppävuori, J., Pehu-Lehtonen, L., Liitiä, T., Tamminen, T., Jääskeläinen, A.-S.
Published in: Nordic Wood Biorefinery Conference, Issue October 23-25, 2018, 2018
Publisher: VTT

Monitoring lignin reactions in LPF resin synthesis

Author(s): Tamminen, T., Jääskeläinen, A.-S., Alakurtti, S., Mikkelsson, A., Virtanen, T., Lourençon, T., Liitiä, T.
Published in: 1st PAPTAC International Lignin Conference, Issue September 18-20, 2018, 2018
Publisher: Pulp and Paper Association of Canada

Improving lignin homogeneity by aqueous solvent fractionation

Author(s): Jääskeläinen, A.-S.; Liitiä, T., Tamminen, T.
Published in: ACS National Meeting 2018, New Orleans, LA, Issue March 18-22, 2018, 2018
Publisher: American Chemical Society

Hardwood kraft lignin fractions as phenol substitute in phenol-formaldehyde resins

Author(s): Lourençon, T.V., Magalhães, W.L.E., Muniz, G.I.B., Virtanen, T., Jääskeläinen, A.-S., Liitiä, T., Alakurtti, S., Hughes, M., Tamminen, T.
Published in: 15th European Workshop on Lignocellulosics and Pulp, Issue June 26-29, 2018, 2018
Publisher: University of Aveiro

Barriers and incentives on the market diffusion of lignin composites – A Delphi-SWOT analysis

Author(s): Schmelzenbart, A., Lettner, M., Hesser, F., Schwarzbauer P.,
Published in: PTF BPI - International Conference on Processing Technologies for the Forest and Biobased Industries 2018, 2018
Publisher: Salzburg University of Applied Sciences

Integrating environmental and market assessment into technical R&D projects

Author(s): Lettner M. & Hesser F.
Published in: PTF BPI - International Conference on Processing Technologies for the Forest and Biobased Industries 2018, 2018
Publisher: Salzburg University of Applied Sciences

Scenario-based eco-efficiency analysis of lignin valorization pathways

Author(s): Bonell E., Lettner, M., Hesser, F., Schwarzbauer, P.,
Published in: PTF BPI - International Conference on Processing Technologies for the Forest and Biobased Industries 2018, 2018
Publisher: Salzburg University of Applied Sciences

Barrieres and Incentives for the market diffusion of lignin based products

Author(s): Lettner, M., Hesser, F., Zins, F., Smith,L., Stern,T.
Published in: Proceedings of the 12th meeting of the Northern European Network for Wood Science and Engineering (WSE). Wood science and engineering - a key factor on the transition to Bioeconomy, Issue 9/2016, 2016, ISBN 978-9934-14-982-5
Publisher: Bruno Andersons and Arnis Kokorevics (Editor)

Production of homogeneous kraft lignin by aqueous solvent fractionation

Author(s): A-S Jääskeläinen, T Liitiä, T Tamminen
Published in: EWLP 14th European Workshop on Lignocellulosics and Pulp, Issue June 2016, 2016, Page(s) 95-98, ISBN 979-10-90188-01-3
Publisher: EWLP

SMART Lignin Utilization –An Assessment of newly-developed technologies and products

Author(s): Miriam Lettner, Franziska Hesser, Laura Smith, Florian Zins and Tobias Stern
Published in: Paper & Biorefinery Conference, Issue 11.-13.05.2016, 2016
Publisher: Akademischer Papieringenieur-Verein

Carbohydrate-free and highly soluble softwood kraft lignin fractions by aqueous acetone evaporation fractionation - OPEN ACCESS

Author(s): Anna-Stiina Jääskeläinen, Pia Willberg-Keyriläinen, Tiina Liitiä, Tarja Tamminen
Published in: Nordic Pulp and Paper Research Journal, Issue 32/04, 2017, Page(s) 485-492, ISSN 0283-2631
Publisher: Mentor Communications AB
DOI: 10.3183/NPPRJ-2017-32-04-p485-492

Aqueous acetone fractionation of kraft, organosolv and soda lignins

Author(s): Juan Domínguez-Robles, Tarja Tamminen, Tiina Liitiä, María Soledad Peresin, Alejandro Rodríguez, Anna-Stiina Jääskeläinen
Published in: International Journal of Biological Macromolecules, Issue 106, 2018, Page(s) 979-987, ISSN 0141-8130
Publisher: Elsevier BV
DOI: 10.1016/j.ijbiomac.2017.08.102

The Impact of Molecular Weight of Kraft-lignin on Adhesive Performance of Lignin Based Phenol Formaldehyde Resins

Author(s): Solt, P., Jääskelainen, A-S., Lingenfelter, P., Konnerth, J., van Herwijnen, H. W. G.
Published in: Forest Products Jounal, 2018, ISSN 0015-7473
Publisher: Forest Products Society
DOI: 10.13073/FPJ-D-17-00079

Lignin phenol formaldeyhde resiles using base-catalyzed kraft lignin

Author(s): Solt, P., Rößinger, B., Lingenfelter, P., Konnerth, J., van Herwijnen, H.W.G.
Published in: Polymers, 2018, ISSN 2073-4360
Publisher: MDPI - Multidisciplinary Digital Publishing Institute

From Wood to Resin—Identifying Sustainability Levers through Hotspotting Lignin Valorisation Pathways

Author(s): Miriam Lettner, Pia Solt, Björn Rößiger, Daniela Pufky-Heinrich, Anna-Stiina Jääskeläinen, Peter Schwarzbauer, Franziska Hesser
Published in: Sustainability, Issue 10/8, 2018, Page(s) 2745, ISSN 2071-1050
Publisher: MDPI Open Access Publishing
DOI: 10.3390/su10082745

Process scale-up for the production of bioaromatic compounds from lignin

Author(s): Pufky-Heinrich D, Rößiger B, Röver R, Unkelbach G
Published in: Chemie Ingenieur Technik, Issue 88, 9, 2016, Page(s) 1229-1230, ISSN 1522-2640
Publisher: WILEY-VCH Verlag GmbH & Co. KGaA
DOI: 10.1002/cite.201650156

Factors influencing the market diffusion of bio-based plastics: Results of four comparative scenario analyses

Author(s): Miriam Lettner, Josef-Peter Sch?ggl, Tobias Stern
Published in: Journal of Cleaner Production, Issue 157, 2017, Page(s) 289-298, ISSN 0959-6526
Publisher: Elsevier BV
DOI: 10.1016/j.jclepro.2017.04.077

Aqueous organic solvent fractionation as means to improve lignin homogeneity and purity

Author(s): A.-S. J??skel?inen, T. Liiti?, A. Mikkelson, T. Tamminen
Published in: Industrial Crops and Products, Issue 103, 2017, Page(s) 51-58, ISSN 0926-6690
Publisher: Elsevier BV
DOI: 10.1016/j.indcrop.2017.03.039

Phenol substitution by Kraft lignin in selected adhesives for plywood production - A resource efficiency assessment

Author(s): Greiner, D.
Published in: 2017
Publisher: University of Natural Resources and Life Sciences, Vienna

A comparative Life Cycle Assessment of Different Excess Lignin Valorisation Methods

Author(s): Bonell E.
Published in: 2018
Publisher: University of Natural Resources and Life Sciences, Vienna

Lignin as composite material - Barriers and incentives of market diffusion

Author(s): Schmelzenbart, A. C.
Published in: 2018
Publisher: University of Natural Resources and Life Sciences, Vienna

Identifiying barriers against and incentives for a successful market entry of lignin an amine curing agent in epoxy resins with the help of the Delphi Method and SWOT Analysis

Author(s): Smith, L.
Published in: 2018
Publisher: University of Natural Resources and Life Sciences, Vienna

Scenario Analysis for lignin-based PU foams

Author(s): Haberl, N.
Published in: 2018
Publisher: University of Graz

Market diffusion of lignin based PF resins: Identification of influencing factors with the help of the Perception GAP Analysis

Author(s): Zins F.
Published in: Issue October 2016, 2016
Publisher: University of Natural Resources and Life Sciences, Vienna

Development and Opportunities for biobased plastics: A comparative Scenario Analysis for PLA, PHA, Lignin and CNSL

Author(s): Lettner M.
Published in: Issue November 2015, 2015
Publisher: University of Natural Resources and Life Sciences, Vienna

Life Cycle Assessment in R&D Projects - Assessing Technologies for the Conversion of Industrial Lignins into Biobased Materials

Author(s): Lettner M.
Published in: Ökobilanzwerkstatt, 2016
Publisher: Ökobilanzwerkstatt

Searching for OpenAIRE data...

There was an error trying to search data from OpenAIRE

No results available