Skip to main content
European Commission logo
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

The Internet Of Historical Things And Building New 3D Cultural Worlds

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Selection of Static Sensor Hardware & Release of Specification

Report specifying the hardware platform that will be used to support the open source multi-technique 3D scanner.

Dissemination Plan

Document including a detailed version of the preliminary dissemination plans with concrete actions for the dissemination activities of each partner.

Report on the Static and Aerial Sensors

Deliverable reporting on the drone hover motion control/determination, as well as on the lab tests performed with the static sensor. The report will summarize our findings in statistically characterising the motion of the drones and investigating appropriate time-averaging techniques to reduce stand-off error caused by the static oscillation of the drone when hovering. It will also incorporate the pre-evaluation results of static sensor performed by the museum partners

Testing Protocol, Evaluation Results & Revised Requirement I

This deliverable will outline the methodology followed to conduct the evaluation tests and will report on the results. This deliverable will be updated in M36.

Technology Transfer Roadmap

Report on the necessary steps for bringing DigiArt results into mainstream adoption, as well as reporting on the training sessions organized in T7.3

Updated Dissemination Plan

Report summarizing the project dissemination activities, assessing their impact and suggesting potential corrections to the adopted strategy.

Testing Protocol, Evaluation Results & Revised Requirements II

This deliverable will outline the methodology followed to conduct the final evaluation tests and will report on the results.

Architecture and Interface Design

Report on the architecture that will be adopted for integrating all technologies under the joint cause of supporting the story telling engine. Mockups specifying the design and workflow of the final application will be also included, discussing how they manage to address the functional requirements reported in D2.2

AIV Test Plans & Integration Results

Report on the integration protocol that will be established between the individual modules and the story telling engine, as well as on the integration tests that have been undertaken to verify the operational capacity of each module.

Report on the Registration of Heterogeneous Types of Captured Data

This deliverable will report on the methods and tools that will be employed to successfully register the point clouds that will be generated in WP3, into a common reference system.

Definition of Funcional Requirements & Story Plots

The report will provide the functional requirements for the developed technologies and will also outline the story plots for the demonstrators.

First Workshop

Sensor Launch Workshop

Final Workshop

The Project Legacy Workshop

Second Workshop

Drones in Cultural Heritage Workshop

Project Communication Kit

Initial project publicity material consisting of the project web-site, poster, leaflet and factsheet, as well as the project’s social media accounts (i.e. Twitter, LinkedIn and Facebook).

First Version of the Aerial and Static Scanning Sensor

Delivery of the first prototype for the stabilized drones capable of high quality LIDAR and stereo-photogrammetry 3D data capture, together with the first-cycle infrastructure for the open source 3D scanning.

Final Version Demonstrators Instantiated

Demonstrators instantiated with the technologies and functional requirements determined during the second development cycle of the project.

Final Version of the Algorithms for the Creation of 3D Models

The initial software implementation will be optimized with the purpose to facilitate the creation of 3D models in large scales.

Initial Version of the Algorithms for 3D Semantics Extraction and Content Interlinking

Software implementation and documentation of the algorithms that will be used for 3D semantics extraction and content interlinking. The specifications of these algorithms will be derived by the functional requirements and story plots defined in WP2.

First Version of the Story Telling Engine

Software implementation of the framework for composing stories in the 3D cultural worlds. This framework will encompass the results of 3D semantics extraction and content interlinking.

Initial Version of the Algorithms for the Creation of 3D Models

Software implementation and documentation of the algorithms that will be used for the creation of 3D models.

Creativity Hotspots Through Tangible and Intangible Interaction

Algorithmic implementation and a prototype that will facilitate the interaction of the visitor with a 3D artefact and the creation of a personalized souvenir to take home.

Final Version of the Algorithms for 3D Semantics Extraction and Content Interlinking

The initial implementation of the algorithms will be optimized towards the direction of becoming domain independent as well as learning efficient models from a few training samples and with minimum supervision.

First Version Demonstrators Instantiated

Demonstrators instantiated with the technologies and functional requirements determined during the first development cycle of the project.

Final Version of the Story Telling Engine

Improved version of the initial implementation encompassing the results of the second development cycle, as well as introducing optimizations with respect to the quality of the generated content and the compatibility with the virtual reality headsets.

Final Version of the Aerial and Static Sensor

Delivery of the final prototypes for aerial and static sensor 3D scanning, together with the final evaluation reports on static sensor data capture and the data collected with drones.

Open Research Data pilot

This deliverable outlines the Data Management Plan (DMP) that will be employed during the H2020 project DigiArt.

Publications

Aiding phase unwrapping by increasing the number of residues in two-dimensional wrapped-phase distributions

Auteurs: Munther A. Gdeisat, David R. Burton, Francis Lilley, Miguel Arevalillo-Herráez, Marwan M. M. Ammous
Publié dans: Applied Optics, Numéro 54/34, 2015, Page(s) 10073, ISSN 0003-6935
Éditeur: Optical Society of America
DOI: 10.1364/AO.54.010073

A spatial algorithm to reduce phase wraps from two dimensional signals in fringe projection profilometry

Auteurs: Miguel Arevalillo-Herráez, Munther Gdeisat, Francis Lilley, David R. Burton
Publié dans: Optics and Lasers in Engineering, Numéro 82, 2016, Page(s) 70-78, ISSN 0143-8166
Éditeur: Elsevier BV
DOI: 10.1016/j.optlaseng.2015.11.009

Simple and accurate empirical absolute volume calibration of a multi-sensor fringe projection system

Auteurs: Munther Gdeisat, Mohammad Qudeisat, Mohammed AlSa׳d, David Burton, Francis Lilley, Marwan M.M. Ammous
Publié dans: Optics and Lasers in Engineering, Numéro 80, 2016, Page(s) 32-44, ISSN 0143-8166
Éditeur: Elsevier BV
DOI: 10.1016/j.optlaseng.2015.12.013

Fast fringe pattern phase demodulation using FIR Hilbert transformers

Auteurs: Munther Gdeisat, David Burton, Francis Lilley, Miguel Arevalillo-Herráez
Publié dans: Optics Communications, Numéro 359, 2016, Page(s) 200-206, ISSN 0030-4018
Éditeur: Elsevier BV
DOI: 10.1016/j.optcom.2015.09.084

Uncertainty Characterisation of Mobile Robot Localisation Techniques using Optical Surveying Grade Instruments

Auteurs: Benjamin McLoughlin, Harry Pointon, John McLoughlin, Andy Shaw, Frederic Bezombes
Publié dans: Sensors, Numéro 18/7, 2018, Page(s) 2274, ISSN 1424-8220
Éditeur: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s18072274

Deep Learning Advances in Computer Vision with 3D Data

Auteurs: Anastasia Ioannidou, Elisavet Chatzilari, Spiros Nikolopoulos, Ioannis Kompatsiaris
Publié dans: ACM Computing Surveys, Numéro 50/2, 2017, Page(s) 1-38, ISSN 0360-0300
Éditeur: Association for Computing Machinary, Inc.
DOI: 10.1145/3042064

PHOTOGRAMMETRIC ACCURACY AND MODELING OF ROLLING SHUTTER CAMERAS

Auteurs: Jonas Vautherin, Simon Rutishauser, Klaus Schneider-Zapp, Hon Fai Choi, Venera Chovancova, Alexis Glass, Christoph Strecha
Publié dans: ISPRS Annals of Photogrammetry, Remote Sensing and Spatial Information Sciences, Numéro III-3, 2016, Page(s) 139-146, ISSN 2194-9050
Éditeur: Copernicus GmbH (Copernicus Publications) on behalf of the ISPRS
DOI: 10.5194/isprs-annals-III-3-139-2016

[POSTER] Transforming Your Website to an Augmented Reality View

Auteurs: Dimitrios Ververidis, Spiros Nikolopoulos, Ioannis Kompatsiaris
Publié dans: 2015 IEEE International Symposium on Mixed and Augmented Reality, 2015, Page(s) 108-111, ISBN 978-1-4673-7660-0
Éditeur: IEEE
DOI: 10.1109/ISMAR.2015.33

An Interactive Content-Based 3D Shape Retrieval System for on-Site Cultural Heritage Analysis

Auteurs: Lirone Samoun, Thomas Fisichella, Diane Lingrand, Lucas Malleus, Frederic Precioso
Publié dans: 2018 25th IEEE International Conference on Image Processing (ICIP), 2018, Page(s) 1043-1047, ISBN 978-1-4799-7061-2
Éditeur: IEEE
DOI: 10.1109/icip.2018.8451546

Digiart: Building new 3D cultural heritage worlds

Auteurs: Eleftherios Anastasovitis, Dimitrios Ververidis, Spiros Nikolopoulos, Ioannis Kompatsiaris
Publié dans: 2017 3DTV Conference: The True Vision - Capture, Transmission and Display of 3D Video (3DTV-CON), 2017, Page(s) 1-4, ISBN 978-1-5386-1635-2
Éditeur: IEEE
DOI: 10.1109/3dtv.2017.8280406

KPPF: Keypoint-Based Point-Pair-Feature for Scalable Automatic Global Registration of Large RGB-D Scans

Auteurs: L. Malleus, T. Fisichella, D. Lingrand, F. Precioso, N. Gros, Y. Noutary, L. Robert, L. Samoun
Publié dans: 2017 IEEE International Conference on Computer Vision Workshops (ICCVW), 2017, Page(s) 2495-2502, ISBN 978-1-5386-1034-3
Éditeur: IEEE
DOI: 10.1109/iccvw.2017.294

Towards an Unmanned 3D Mapping System Using UWB Positioning

Auteurs: Benjamin McLoughlin, Jeff Cullen, Andy Shaw, Frederic Bezombes
Publié dans: Towards Autonomous Robotic Systems - 19th Annual Conference, TAROS 2018, Bristol, UK July 25-27, 2018, Proceedings, Numéro 10965, 2018, Page(s) 416-422, ISBN 978-3-319-96727-1
Éditeur: Springer International Publishing
DOI: 10.1007/978-3-319-96728-8_35

Recherche de données OpenAIRE...

Une erreur s’est produite lors de la recherche de données OpenAIRE

Aucun résultat disponible