An integrated pilot line for micro-fabricated medical devices

Projektinformationen

InForMed

ID Finanzhilfevereinbarung: 662155

DOI 10.3030/662155

Projekt abgeschlossen

EK-Unterschriftsdatum 10 Juli 2015

Startdatum 1 Juni 2015

Enddatum 30 September 2018

Finanziert unter

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Information and Communication Technologies (ICT)

Gesamtkosten € 47 773 600,41

EU-Beitrag € 11 249 720,51

Koordiniert durch

PHILIPS ELECTRONICS NEDERLAND BV
Netherlands

Leistungen

Documents, reports (3)

Initial dissemination plan & communication plan
Public summary of project
Final report on projects results

Final report on project results

Demonstrators, pilots, prototypes (11)

Measurement equipment for Cytopatch prototypes demonstrated
Demonstration of ablation catheter using ultra-sound ablation monitoring and OSS
Prototype feasibility demonstration
Final prototype and associated datasheet
Demonstration of ready-to-use electrophysiology CMOS chip
Implementation and way of working with Product Data Management system
First prototypes of Cytopatch and MEA chip
Blue print for development & industrialization project micro modules.
Demonstration of a fully optically powered smart catheter
Demonstrate Statistical Process Control (SPC) on the defined critical process parameters.
Demonstration of in-wall extruded electrode contacts as technology for the production of highly integrated catheters.

Websites, patent fillings, videos etc. (1)

Setting up public project web site.

Other (1)

InForMed Exploitation Symposium

Report on InForMed Exploitation Symposium and launching event (DMD conference)

Veröffentlichungen

Conference proceedings (1)

Novell method for adhesion between pi-pdms using butyl rubber for large area body patches

Autoren: S.Joshi et al.
Veröffentlicht in: 2017
Herausgeber: Eurosensor

Peer reviewed articles (4)

Chemically Stable Atomic-Layer-Deposited Al 2 O 3 Films for Processability

Autoren: Mikael Broas, Olli Kanninen, Vesa Vuorinen, Markku Tilli, Mervi Paulasto-Kröckel
Veröffentlicht in: ACS Omega, Ausgabe 2/7, 2017, Seite(n) 3390-3398, ISSN 2470-1343
Herausgeber: AS Omega
DOI: 10.1021/acsomega.7b00443

Single-Step CMOS Compatible Fabrication of High Aspect Ratio Microchannels Embedded in Silicon

Autoren: Marta Kluba, Aslihan Arslan, Ronald Stoute, James Muganda, Ronald Dekker
Veröffentlicht in: Proceedings, Ausgabe 1/4, 2017, Seite(n) 291, ISSN 2504-3900
Herausgeber: Eurosensor
DOI: 10.3390/proceedings1040291

Ultra-Stretchable Interconnects for High-Density Stretchable Electronics

Autoren: Salman Shafqat, Johan Hoefnagels, Angel Savov, Shivani Joshi, Ronald Dekker, Marc Geers
Veröffentlicht in: Micromachines, Ausgabe 8/9, 2017, Seite(n) 277, ISSN 2072-666X
Herausgeber: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi8090277

Electrifying catheters with light,” The Optical Society, Optics Express Vol. 25, Issue 8, pp. 8534-8549 (2017). The article was highlighted on the optical society SPOTLIGHT page in May 2017!

Autoren: M. Pekar et al.
Veröffentlicht in: Optics express, 2017, ISSN 1094-4087
Herausgeber: Optical Society of America

Monographic books (1)

Flex-to-Rigid (F2R), A high precision assembly platform,” A brochure explaining the open F2R platform that will be running in the pilot-line.

Autoren: University of Delft and Philips Research.
Veröffentlicht in: 2017
Herausgeber: Philips