Objectif
The thermal-hydraulics Simulations and Experiments for the Safety Assessment of Metal cooled reactor (SESAME) project supports the development of European liquid metal cooled reactors (ASTRID, ALFRED, MYRRHA, SEALER). The project focusses on pre-normative, fundamental, safety-related, challenges for these reactors with the following objectives:
• Development and validation of advanced numerical approaches for the design and safety evaluation of advanced reactors;
• Achievement of a new or extended validation base by creation of new reference data;
• Establishment of best practice guidelines, Verification & Validation methodologies, and uncertainty quantification methods for liquid metal fast reactor thermal hydraulics.
The SESAME project will improve the safety of liquid metal fast reactors by making available new safety related experimental results and improved numerical approaches. These will allow system designers to improve the safety relevant equipment leading to enhanced safety standards and culture.
Due to the fundamental and generic nature of SESAME, developments will be of relevance also for the safety assessment of contemporary light water reactors. By extending the knowledge basis, SESAME will allow the EU member states to develop robust safety policies. At the same time, SESAME will maintain and further develop the European experimental facilities and numerical tools.
The consortium of 25 partners provides American-European-wide scientific and technological excellence in liquid metal thermal hydraulics, as well as full alignment with ESNII and with NUGENIA where of interest. A close interaction with the European liquid metal cooled reactor design teams is foreseen involving them in the Senior Advisory Committee. They will actively advise on the content of the project and will be the prime end-users, ensuring their innovative reactor designs will reach highest safety standards using frontier scientific developments.
Champ scientifique
Not validated
Not validated
- engineering and technologyother engineering and technologiesnuclear engineering
- engineering and technologyenvironmental engineeringenergy and fuelsnuclear energy
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensors
- natural sciencesphysical sciencesclassical mechanicsfluid mechanicsfluid dynamicscomputational fluid dynamics
- natural sciencesmathematicsapplied mathematicsnumerical analysis
Programme(s)
- H2020-Euratom - Euratom Main Programme
- H2020-Euratom-1.8. - Ensure availability and use of research infrastructures of pan_european relevance
- H2020-Euratom-1.3. - Support the development and sustainability of nuclear competences at Union level
- H2020-Euratom-1.1. - Support safe operation of nuclear systems
Régime de financement
RIA - Research and Innovation actionCoordinateur
00196 Roma
Italie
Voir sur la carte
Participants (22)
75011 Paris
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
75015 PARIS 15
Voir sur la carte
09050 Pula Cagliari
Voir sur la carte
1755 LE Petten
Voir sur la carte
50667 Koln
Voir sur la carte
01328 Dresden
Voir sur la carte
92260 Fontenay Aux Roses
Voir sur la carte
1000 Ljubljana
Voir sur la carte
76131 Karlsruhe
Voir sur la carte
100 44 Stockholm
Voir sur la carte
5232 Villigen Psi
Voir sur la carte
1160 Bruxelles / Brussel
Voir sur la carte
2628 CN Delft
Voir sur la carte
1348 Louvain La Neuve
Voir sur la carte
9000 Gent
Voir sur la carte
41121 Modena
Voir sur la carte
56126 Pisa
Voir sur la carte
00185 Roma
Voir sur la carte
8005 Zurich
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
1640 Sint-Genesius-Rode
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
250 68 Husinec-Rez
Voir sur la carte
80333 Muenchen
Voir sur la carte