Obiettivo
LEILAC, Low Emissions Intensity Lime And Cement, will successfully pilot a breakthrough technology that will enable both Europe’s cement and lime industries to reduce their emissions dramatically while retaining, or even increasing, international competitiveness. LEILAC will develop, build and operate a 240 tonne per day pilot plant demonstrating Direct Separation calcining technology which will capture over 95% of the process CO2 emissions (which is 60 % of total CO2 emissions) from both industries without significant energy or capital penalty.
Direct Separation technology uses indirect heating in which the process CO2 and furnace combustion gases do not mix, resulting in the simple capture of high quality CO2. This innovation requires minimal changes to the conventional processes for cement, replacing the calciner in the Preheater-Calciner Tower. For lime there is no product contamination from the combustion gas. The technology can be used with alternative fuels and other capture technologies to achieve negative CO2 emissions. The project will also enable research into novel building materials with a reduced CO2 footprint, as well the upgrade of low value limestone fines and dust to high value lime applications.
The high potential of the project is complemented by high deliverability. The requested grant will secure €8.8m of in-kind funding and support from the LEILAC consortium members, which include world leading engineering, cement, lime and R&D organisations.
To accelerate further development, LEILAC will deliver a techno-economic roadmap, and comprehensive knowledge sharing activities including a visitor centre at the pilot site near Brussels. In order to reach the required 80% emissions reductions by 2050, CCS will need to be applied to 85% of European clinker production, and LEILAC is uniquely placed to allow Europe to achieve these targets in a timely, effective and efficient manner.
Campo scientifico
- engineering and technologyenvironmental engineeringenergy and fuelsrenewable energy
- engineering and technologyenvironmental engineeringenergy and fuelsfossil energynatural gas
- engineering and technologychemical engineeringseparation technologies
- natural sciencesphysical sciencesclassical mechanicsfluid mechanicsfluid dynamicscomputational fluid dynamics
- engineering and technologyenvironmental engineeringcarbon capture engineering
Programma(i)
Invito a presentare proposte
Vedi altri progetti per questo bandoBando secondario
H2020-LCE-2015-1-two-stage
Meccanismo di finanziamento
RIA - Research and Innovation actionCoordinatore
75001 Paris
Francia
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.
Partecipanti (14)
69120 Heidelberg
Mostra sulla mappa
2555 Brugg Bei Biel
Mostra sulla mappa
WV4 6JP Wolverhampton
Mostra sulla mappa
1342 Limelette
Mostra sulla mappa
Partecipazione conclusa
WA16 8QZ Cheshire
Mostra sulla mappa
2073 Pymble Nsw
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.
Partecipazione conclusa
1755 LE Petten
Mostra sulla mappa
SW7 2AZ LONDON
Mostra sulla mappa
W6 7HA London
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.
1024 Ecublens Vd
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.
SE1 9NT London
Mostra sulla mappa
2595 DA Den Haag
Mostra sulla mappa
1120 Bruxelles / Brussel
Mostra sulla mappa
SP1 1BG Salisbury Wiltshire
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.