Skip to main content
European Commission logo
English English
CORDIS - EU research results
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

Building Innovation in the Extended Digital Chain

Deliverables

data mgmnt. plan

The Data Management Plan describes the data management life cycle for all data sets that will be collected, processed or generated by the action. It is a document describing what data will be collected, processed or generated and following what methodology and standards, whether and how this data will be shared and/or made open, and how it will be curated and preserved

"Research exhibition ""Prototypes"" and colloquia 2"

Show-casing material research results and reporting in journal form of first shared colloquium. The research exhibition “Prototypes” focuses on direct full scale testing of defined design criteria against real-world methods of realisation and production.

Workshop-seminar 2

The deliverable will report on progress and outcomes of workshop-seminar 2. The workshop-seminar is a three part event with the scientific foci: 2.1) Communication design: Identifying methods for interdisciplinary collaboration. 2.2) Simulating design: Introducing virtual prototyping strategies and for new material practice. 2.3) Materialising design: Introducing novel materials for robotically steered fabrication.

Concluding international conference and extended catalogue

Concluding international conference with peer-reviewed paper presentations from the field. Completion of final reporting of research results in extended catalogue. Review of results and their contextualisation in industrial context.

Workshop-seminar 1

The deliverable will report on progress and outcomes of workshop-seminar 1. The workshop-seminar is a three part event with the scientific foci: 1.1) Communication design: Introducing light weight simulation tools for early stage design structural ideation 1.2) Simulating design: Identifying the relevance of accurate simulation tools within the context of design and building industry. 1.3) Materialising design: Identifying critical concepts and drives of robotic fabrication.

"Research exhibition ""Design Probes"" and colloquia 1"

Show-casing material research results and reporting in journal form of first shared colloquium. The research exhibition “Design Probes” focuses on early speculative design probes allowing ideation.

"Research exhibition ""Demonstrators"" and VIVA"

Show-casing material research results and reporting in journal form of first shared colloquium. The research exhibition “Demonstrators” focuses on proof-of-concept testing design criteria in direct spatial manners.

Updated Data Management Plan

According to participation in Horizon 2020 Open Research Data pilot.

Publications

digital fabrication with virtual and augmented reality for Monolithic earthen shells

Author(s): chaltiel, stephanie; bravo, Maite; Chronis, Angelos
Published in: shock! sharing of Computable Knowledge, Issue 1, 2017
Publisher: ecaade
DOI: 10.5281/zenodo.1064004

Multi-Scalar Modelling for Free-form Timber Structures

Author(s): Paul Poinet, Paul Nicholas, Martin Tamke, Mette Ramsgard Thomsen
Published in: IASS 2016 Tokyo Symposium: Spatial Structures in the 21st Century, Issue September 16-30 2016, 2016
Publisher: IASS
DOI: 10.5281/zenodo.2611218

Digital Tools Beyond Aesthetics

Author(s): Dimitrie A. Stefanescu
Published in: Research Based Education, Issue Volume 2, 2016, Page(s) 481-489, ISBN 978-0-9929485-9-7
Publisher: The Bartlett School of Architecture
DOI: 10.5281/zenodo.3265817

Geometry-Material Coordination for Passive Adaptive Solar Morphing Envelopes

Author(s): Sarah Mokhtar, Christopher Leung and Angelos Chronis
Published in: SimAUD 2017, Issue 2017 Proceedings of the Symposium on Simulation for Architecture and Urban Design, 2017
Publisher: SIMULATION COUNCILS, INC

Symbiotic Associations

Author(s): Baseta, Efilena; Chronis, Angelos
Published in: ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines, Issue Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA), October, 2016, 2016, Page(s) pp. 470-477, ISBN 978-0-692-77095-5
Publisher: ACADIA

Remembrane - A Shape Changing Adaptive Structure

Author(s): Ji Won Jun, Matteo Silverio, Josep Alcover Llubia, Areti Markopoulou, Angelos Chronis and Alexandre Dubor
Published in: CAADFutures 2017, 2017
Publisher: Springer

Integration of CFD Simulations in Computational Design for Harnessing the Natural Ventilation Performance of Typical Atrium Spaces in Athens, Greece

Author(s): Angelos Chronis; Foteini Stefopoulou; Katherine Liapi
Published in: 2018 Building Performance Analysis Conference and SimBuild co-organized by ASHRAE and IBPSA-USA, 2017
Publisher: ASHRAE and IBPSA-USA
DOI: 10.5281/zenodo.3266193

Dry and Liquid Clay Mix for Bioshotcrete

Author(s): chaltiel Stephanie; bravo Maite; mansouri Masoumeh; goessens sebastien; Latteur Pierre; Ahmad Ismail
Published in: International Association for Shell and Spatial Structures (IASS), Issue 5, 2018
Publisher: IASS
DOI: 10.5281/zenodo.2669424

Adaptive Robotic Training Methods for Subtractive Manufacturing

Author(s): Brugnaro, Giulio; Hanna, Sean
Published in: Acadia 2017 Disciplines & Disruption: Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture. (pp. pp. 164-169). Acadia Publishing Company: Cambridge, MA, USA. (2017), Issue 1, 2017
Publisher: MIT
DOI: 10.5281/zenodo.2620086

Schema-Based Workflows and Inter-Scalar Search Interfaces for Building Design

Author(s): Poinet, Paul; Tamke, Martin; Ramsgaard Thomsen, Mette; Scheurer, Fabian; Fisher, Al
Published in: Proceedings of the 11th European Conference on Product and Process Modelling (ECPPM 2018), Issue 29, 2018
Publisher: eWork and eBusiness in Architecture, Engineering and Construction:
DOI: 10.5281/zenodo.2611206

Light formwork for earthen monolithic shells

Author(s): Elizabeta samec; Aakash Srivastava; Stephanie Chaltiel
Published in: International Conference on Sustainable Materials, Systems and Structures (SMSS2019), Issue 29, 2019
Publisher: International Conference on Sustainable Materials, Systems and Structures (SMSS2019)
DOI: 10.5281/zenodo.2669094

Digital fabrication phasing for monolithic shells

Author(s): chaltiel Stephanie; Bravo Maite
Published in: Proceedings of International Association for Shell and Spatial Structures IASS 2017: Interfaces, Issue 5, 2017
Publisher: International Association for Shell and Spatial Structures IASS
DOI: 10.5281/zenodo.2669464

Multi-Machine Fabrication: An Integrative Design Process Utilising an Autonomous UAV and Industrial Robots for the Fabrication of Long Span Composite Structures

Author(s): Benjamin Felbrich; Nikolas Früh; Marshall Prado; Saman Saffarian; James Solly; Lauren Vasey; Jan Knippers; Achim Menges
Published in: ACADIA 2017: Disciplines + Disruption [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)], pp. . 10.5281/zenodo.2667782, Issue 11, 2017, Page(s) 248–259
Publisher: ACADIA
DOI: 10.5281/zenodo.2667782

Connected Augmented Assembly: Cloud Based Augmented Reality Applications in Architecture

Author(s): Lharchi, Ayoub; Ramsgaard Thomsen, Mette; Tamke, Martin
Published in: Proceedings of the ecaade conference 2020, Issue 5, 2020
Publisher: ecaade
DOI: 10.5281/zenodo.3885164

Monolithic Earthen Shells Digital Fabrication: Hybrid Workflow

Author(s): Bravo Maite; Chaltiel Stephanie
Published in: The Design Modelling Symposium 2017, Issue 9, 2017
Publisher: Springer
DOI: 10.5281/zenodo.2669408

Towards Assembly Information Modeling (AIM)

Author(s): Lharchi, Ayoub; Ramsgaard Thomsen, Mette; Tamke, Martin
Published in: Proceedings of SimAud 2019, Issue 12, 2019
Publisher: Society for Modeling & Simulation International (SCS
DOI: 10.5281/zenodo.2656359

Energy Efficient Design for 3D Printed Earth Architecture

Author(s): Dubor, Alexandre; Cabay, Edouard; Chronis, Angelos
Published in: Humanizing Digital Realities, Issue 4, 2017
Publisher: Springer
DOI: 10.5281/zenodo.3266205

Irregular cable-nets: exploring irregularity as a driver for form and structure

Author(s): Giachini, PAGS; Al, B.; Solly, J. J.; Slabbinck, E. L. M.
Published in: Proceedings of the IASS Annual Symposium 2017, Issue 3, 2017, Page(s) 1-10
Publisher: IASS
DOI: 10.5281/zenodo.2625562

The ITECH approach: Building(s) to learn

Author(s): Knippers, Jan; Menges, Achim; Dahy, Hanaa; Früh, Nikolas; Groenewolt, Abel; Körner, Axel; Rinderspacher, Katja; Saffarian, Saman; Slabbinck, Evy L. M.; Solly, Jonathan J.; Vasey, Lauren; Wood, Dylan
Published in: IASS Symposium, Creativity in Structural Design, Issue 20, 2018
Publisher: IASS
DOI: 10.5281/zenodo.2625701

Digitally fabricated active-bending beams for the rapid assembly of temporary structures.

Author(s): Baseta, Efilena; Bollinger, Klaus
Published in: Conference: RCA - Research Culture in Architecture: International conference on cross disciplinary collaboration, Issue 1, 2018
Publisher: technical University Kaiserslautern, Germany
DOI: 10.5281/zenodo.2625867

Wind-formed Architectural Shapes

Author(s): Lenka Kromanikova; Angelos Chronis; Stanislav Kmet; Dušan Katunský
Published in: proceedings of 36th Annual Conference of ecaade 36th Annual Conference 17th-21st September 2018 Lodz Poland., Issue 20, 2018
Publisher: eCAADE
DOI: 10.5281/zenodo.3266186

Integration of CFD in Computational Design - An evaluation of the current state of the art

Author(s): Chronis, Angelos; Dubor, Alexandre; Cabay, Edouard; Mostapha Sadeghipour Roudsari
Published in: proceedings of ecaade 35 - ShoCK! : Sharing of computable knowledge!, Issue 17, 2019
Publisher: ecaade
DOI: 10.5281/zenodo.3266214

Structural design methods of component based lattice composites for the Elytra Pavilion

Author(s): Koslowski, Valentin; Solly, James; Knippers, Jan
Published in: Proceedings of the IASS Annual Symposium 2017 ‘Interfaces: architecture.engineering.science’., Issue 21, 2017
Publisher: IASS
DOI: 10.5281/zenodo.2677669

Construction System for Reversible Self-Formation of Grid Shells. Correspondence between physical and digital form

Author(s): Baseta, Efilena; Bollinger, Klaus
Published in: Proceedings of the ACADIA Annual Symposium 2018 –Recalibration: on imprecision and infidelity, Issue 1, 2018, Page(s) 366-375
Publisher: Universidad Iberoamericana, Mexico City
DOI: 10.5281/zenodo.2625810

Bio-Inspired Kinetic Curved-Line Folding for Architectural Applications

Author(s): Axel Körner; Anja Mader; Saman Saffarian; Jan Knippers
Published in: Proceedings of ACADIA conference 2017, Issue 8, 2016
Publisher: ACADIA
DOI: 10.5281/zenodo.2667788

Torsion as a design driver in plate-bending-active tensile structures

Author(s): Slabbinck, Evy L. M.; Körner, Axel; Knippers, Jan
Published in: Proceedings of the IASS Annual Symposium 2017 ‘Interfaces: architecture.engineering.science’, Issue 2, 2017
Publisher: IASS
DOI: 10.5281/zenodo.2625693

ICD/ITKE Research Pavilion 2016/2017 : Integrative Design of a Composite Lattice Cantilever

Author(s): Solly, James; Frueh, Nicholas; Saffarian, Saman; Prado, Marshall; Vasey, Lauren; Felbrich, Banjamin; Reist, Daniel; Knippers, Jan; Menges, Achim
Published in: Creativity in Structural Design: Proceedings of the IASS Symposium 2018, Issue 3, 2018
Publisher: IASS
DOI: 10.5281/zenodo.2677664

Conceptual framework for analyzing and designing bending-active tensile hybrid structures

Author(s): Slabbinck, Evy L. M.; Suzuki, Seiichi; Solly, Jonathan J.; Mader, Anja; Knippers, Jan
Published in: Proceedings of the IASS Annual Symposium 2017 ‘Interfaces: architecture.engineering.science’, Issue 3, 2017
Publisher: IASS
DOI: 10.5281/zenodo.2625002

Digital Tools Beyond Aesthetics: Mass Creativity and The Enablement of Emergence

Author(s): Stefanescu, Dimitrie
Published in: AAE 2016: Curiosity, Risk, Participation, Issue 14, 2016, Page(s) 481–489
Publisher: UCL The Bartlett, London
DOI: 10.5281/zenodo.3265816

Approximating Climatic Performance using Artificial Neural Networks

Author(s): Zeynep, Aksöz; Chadha Kunaljit; Dubor Alexandre; Cabay Edouard
Published in: Project Catalog of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA), Issue 2, 2018
Publisher: ACADIA
DOI: 10.5281/zenodo.2668916

IceFormwork for Cast HPFRC Elements: Process-Oriented Design of a Light-Weight High-Performance Fiber-Reinforced Concrete (HPFRC) Rain-Screen Façade

Author(s): Sitnikov, Vasily; Eigenraam, Peter; Papanastasis; Wassermann-Fry
Published in: ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA), Issue 1, 2019
Publisher: ACADIA
DOI: 10.5281/zenodo.3885265

Modular Coreless Filament Winding For Lightweight Systems In Architecture

Author(s): Knippers, Jan; Kowlowski, Valentin; Solly, James; Fildhuth, Timo
Published in: CICE 2016 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, Issue 2, 2016
Publisher: CICE
DOI: 10.5281/zenodo.1063908

A comparative overview of generative approaches for computational form-finding of bending-active tensile structures

Author(s): Suzuki, Seiichi; Slabbinck, Evy L. M.; Knippers, Jan
Published in: Proceedings of the IASS Annual Symposium 2017 ‘Interfaces: architecture.engineering.science’, Issue 5, 2017
Publisher: IASS
DOI: 10.5281/zenodo.2625657

Robotic fabrication and earthen shells

Author(s): Chaltiel, stephanie; Bravo, Maite
Published in: CADIA 2017: Disciplines & Disruption Project Exhibition, 2017
Publisher: ACADIA
DOI: 10.5281/zenodo.2669436

The Mobility Topography Model for Substantializing and Projecting Transportation in Cities

Author(s): Trattner, Z., Chronis, A., Muñoz; A.
Published in: Proceedings of the 2017 Symposium on Simulation for Architecture and Urban Design (SimAUD 2017), 2017, ISBN 9781-510870185
Publisher: Society for Modeling and Simulation International (SCS)
DOI: 10.22360/simaud.2017.simaud.033

Paste matter 3d printing in monolithic shells fabrication methods

Author(s): Bravo Maite; Chaltiel Stephanie
Published in: Kine[SIS]tem International Conference Proceedings. From Nature to Architectural Matter, Issue 1, 2017, Page(s) Pp.10-18, ISBN 978-989-8862-24-2
Publisher: ISCTE – Instituto Universitário de Lisboa
DOI: 10.5281/zenodo.2669468

Early Structure Formation in Concrete with Water-to-Cement Ratio 0.2

Author(s): Sitnikov; Sitnikov
Published in: American Concrete Institute, ACI Special Publication, Issue 2, 2018
Publisher: American Concrete Institute, ACI
DOI: 10.5281/zenodo.3938764

Kinetics of UHPC Strength Gain at Subfreezing Temperatures

Author(s): Sitnikov; Sitnikov
Published in: SP-326 Durability and Sustainability of Concrete Structures, Issue 2, 2018
Publisher: DSCS, American Concrete Institute, Moscow
DOI: 10.5281/zenodo.3938740

Computational Bamboo: Digital and Vernacular Design Principles for the Construction of a Temporary Bending-Active Structure

Author(s): Seiichi Suzuki, Evy L. M. Slabbinck, Jan Knippers
Published in: Impact: Design With All Senses - Proceedings of the Design Modelling Symposium, Berlin 2019, 2020, Page(s) 224-236, ISBN 978-3-030-29828-9
Publisher: Springer International Publishing
DOI: 10.1007/978-3-030-29829-6_18

Design, analysis and construction of a bending-active tensile hybrid structure

Author(s): Slabbinck, Evy L.M.; Suzuki, Seiichi; Mader, Anja; Jonas, Florian A.; Knippers, J.
Published in: Proceedings of the IASS Annual Symposium 2019 – Structural Membranes 2019: Form and Force, 2019
Publisher: IASS
DOI: 10.5281/zenodo.3944657

Unreinforced Elements out of UHPC

Author(s): Dr. Sitnikov, I.; MA Sitnikov, V.
Published in: Concrete Plant International, Issue 2/2017, 2017, Page(s) 50, ISSN 1862-0205
Publisher: ad_media GmbH

Adaptive Strategies for Mud Shell Robotic Fabrication

Author(s): Chaltiel Stephanie, Bravo Maite, Ibrahim Abdullah
Published in: International Journal of Environmental Science & Sustainable Development, Issue 3/2, 2018, Page(s) 64, ISSN 2357-0857
Publisher: IEREK
DOI: 10.21625/essd.v3iss2.382

Novel bending-active system with controllable curvature-stiffness

Author(s): Baseta, Efilena
Published in: Archidoct Journal Issue 6-2, Issue 6-2, 2019, Page(s) 90-95, ISSN 2309-0103
Publisher: enhsa
DOI: 10.5281/zenodo.2625931

Ice Formwork for High-Performance Concrete: A Model of Lean Production for Prefabricated Concrete Industry

Author(s): V. Sitnikov
Published in: Structures, Issue 18, 2019, Page(s) 109-116, ISSN 2352-0124
Publisher: Elsevier Limited
DOI: 10.1016/j.istruc.2018.11.004

Matter-Robotic Calibration for Bioshotcrete

Author(s): Maite Bravo; Stephanie Chaltiel; Wilfredo Carazas
Published in: "Temes de Disseny #34: Material interactions in the human-made Milieu", Issue "#34", 2018, Page(s) 78-89, ISSN 2604-5230
Publisher: Elisava Research
DOI: 10.5281/zenodo.2669134

A Multi-scalar Approach for the Modelling and Fabrication of Free-Form Glue-Laminated Timber Structures

Author(s): Tom Svilans, Paul Poinet, Martin Tamke, Mette Ramsgaard Thomsen
Published in: Humanizing Digital Reality, 2018, Page(s) 247-257, ISBN 978-981-10-6610-8
Publisher: Springer Singapore
DOI: 10.1007/978-981-10-6611-5_22

ELYTRA FILAMENT PAVILION: - ROBOTIC FILAMENT WINDING FOR STRUCTURAL COMPOSITE BUILDING SYSTEMS

Author(s): MARSHALL PRADO, MORITZ DÖRSTELMANN, ACHIM MENGES, JAMES SOLLY, JAN KNIPPERS
Published in: Fabricate 2017, 2017, Page(s) 224-231, ISBN 9781-787350014
Publisher: UCL Press
DOI: 10.2307/j.ctt1n7qkg7.35

Ice Formwork for Ultra-High Performance Concrete: Simulation of Ice Melting Deformations

Author(s): Vasily Sitnikov
Published in: Humanizing Digital Reality, 2018, Page(s) 395-406, ISBN 978-981-10-6610-8
Publisher: Springer Singapore
DOI: 10.1007/978-981-10-6611-5_34

New Workflows for Digital Timber

Author(s): Tom Svilans, Martin Tamke, Mette Ramsgaard Thomsen, Jonas Runberger, Kai Strehlke, Martin Antemann
Published in: Digital Wood Design - Innovative Techniques of Representation in Architectural Design, Issue 24, 2019, Page(s) 93-134, ISBN 978-3-030-03675-1
Publisher: Springer International Publishing
DOI: 10.1007/978-3-030-03676-8_3

Adaptive Robotic Carving - Training Methods for the Integration of Material Performances in Timber Manufacturing

Author(s): Giulio Brugnaro, Sean Hanna
Published in: Robotic Fabrication in Architecture, Art and Design 2018 - Foreword by Sigrid Brell-Çokcan and Johannes Braumann, Association for Robots in Architecture, 2019, Page(s) 336-348, ISBN 978-3-319-92293-5
Publisher: Springer International Publishing
DOI: 10.1007/978-3-319-92294-2_26

Negotiated Materialization: Design Approaches Integrating Wood Heterogeneity Through Advanced Robotic Fabrication

Author(s): Giulio Brugnaro, Angelo Figliola, Alexandre Dubor
Published in: Digital Wood Design - Innovative Techniques of Representation in Architectural Design, Issue 24, 2019, Page(s) 135-158, ISBN 978-3-030-03675-1
Publisher: Springer International Publishing
DOI: 10.1007/978-3-030-03676-8_4

Geometry-Induced System of Controlled Deformations. Application in Self-organized Wooden Gridshell Structures

Author(s): Efilena Baseta
Published in: Digital Wood Design - Innovative Techniques of Representation in Architectural Design, Issue 24, 2019, Page(s) 719-742, ISBN 978-3-030-03675-1
Publisher: Springer International Publishing
DOI: 10.1007/978-3-030-03676-8_28

Design Transactions - Rethinking Information Modelling for a New Material Age

Author(s): Sheil, Bob ; Thomsen, Mette Ramsgaard; Tamke, Martin; Hanna, Sean
Published in: Design Transactions - Rethinking Information Modelling for a New Material Age, 2020, ISBN 9781-787355026
Publisher: UCL Press
DOI: 10.5281/zenodo.3938860

Searching for OpenAIRE data...

There was an error trying to search data from OpenAIRE

No results available