Deliverables
This is a result from task T1.1, and it presents INSITER Methodology for existing buildings.
Training modules and pilot training coursesThis is a result from task T6.1, which also includes a Learning Content Management System.
Field validation report and recommendationsThis is a result from task T5.2, which comprises the documentation and reports on the field validation. The report will show the final performance of the buildings and the positive impact of self-inspection addressing the following aspects: building physics analysis (e.g. U-value, sound insulation ); reliability of structure; preferred materials and their assembly demands; and indoor climate.
Case study elaboration, field validation protocols, and equipment calibrationThis is a result from task T52 which contains the description of the use cases for the purpose of field validation of the prototype INSITER Systems and Methodology
Calculation and analytical methods for MEP/HVAC componentsThis is a result from task T13 and it describes conceptual measurement protocols and quantitative method for selfinspection of MEPHVAC components It focuses on selfinspection of critical MEPHVAC components that affect quality and energy performance in all phases of a building project
Best practices and existing shortcomingsThis is a result from task T11 and it critically reviews the stateoftheart procedures and describes innovative ways for selfinspection quality assurance and energyperformance check
Dissemination and exploitation plansThis is a result from task T6.3. The outlined and intended content are described in DoA addressing dissemination and exploitation intentions. The first version of the plans (public) will be delivered in M3, but they will continuously be updated until the project completion in M48. The final exploitation plan related to the business plan will be confidential (CO).
Recommendations for standardisationThis is a result from task T6.1. Reflection will be made on existing guidelines and standards to extend the preliminary list. Targeted standardisation areas –including building engineering and energy, quality management, ICT and BIM, as well as procurement.
Integrated field demonstration reportIncluding set-up and results of demonstration activities involving stakeholders at real cases. This is a combined deliverable of the original D5.5 and D5.6. The content and coverage remain the same.
Calculation and analytical methods for building componentsThis is a result from task T12 and it focuses on selfinspection of critical building components that affect quality and energyperformance
BIM-based self-instruction models for mobile devicesThis is a result from task T4.2, which will be developed in conjunction with the training modules in WP6/T6.1 –self-instructions for improvement of worker’ knowledge and skills.
Measuring and diagnosis solutions for inspecting MEP/HVAC componentsThis is a result from task T1.3, and it presents the practical measurement protocols supported by hardware and software tools for self-inspection of MEP/HVAC components. It presents practical techniques (protocols) supported by hardware and software for self-inspection in all phases of a building project.
Lab test report and recommendationsThis is a result from task T51 which will conclude the lab an virtual tests and present recommendations for improvement and validation of the prototype INSITER Systems and Methodology
Measuring and diagnosis solutions for inspecting building componentsThis is a result from task T1.2, and it presents practical techniques using hardware and software tools for self-inspection of building components.
Guidelines for self-inspection in new constructionThis is a result from task T1.1, and it presents INSITER Methodology for new buildings.
Cross-case analysis and benchmarkingThis deliverable also describes the industry’s views on practicality and affordability of INSITER tools and methods. After the original D5.6 is removed, this present deliverable will be the new D5.6.
This is a result from task T51 which will serve as guidelines to carry out the lab test activities and analysis of the findings
Functional requirements and integration architecture of applications for process, planning and costThis is a result from task T31 which will serve as the underpinning for further software development addressing planning and cost management
Functional requirements and integration architecture of applications for building quality and energy assessmentsThis is a result from task T32 which will serve as the underpinning for further software development addressing building quality and energy performance
Framework for BIM, hardware and software data inter-operabilityThis is a result from task T42 which address data interoperability between different types of hardware instruments for measurement incl their firmware middleware software tools and BIM
This is a result from task T62 The types of dissemination items are described in the DoA as part of the preliminary dissemination plan The first materials eg leaflets templates will be available starting from M3 but the work will continue as new dissemination materials will be delivered and updated until the project completion in M48
Public and consortium websitesThis is a result from task T62 The websites will be delivered and fulloperational in M3 and they will be updated until the project completion in M48
Publications
Author(s):
Rizal Sebastian, Rosamaria Olivadese, Emanuele Piaia, Roberto Di Giulio, Peter Bonsma, Jan-Derrick Braun, Günther Riexinger
Published in:
Proceedings, Issue 2/15, 2018, Page(s) 1153, ISSN 2504-3900
Publisher:
MDPI AG
DOI:
10.3390/proceedings2151153
Author(s):
Günther Riexinger, Andreas Kluth, Manuel Olbrich, Jan-Derrik Braun, Thomas Bauernhansl
Published in:
Procedia CIRP, Issue 72, 2018, Page(s) 1124-1129, ISSN 2212-8271
Publisher:
Elsevier B.V
DOI:
10.1016/j.procir.2018.03.160
Author(s):
José L. Hernández, Pedro Martín Lerones, Peter Bonsma, Andrè van Delft, Richard Deighton, Jan-Derrick Braun
Published in:
Buildings, Issue 8/2, 2018, Page(s) 32, ISSN 2075-5309
Publisher:
MDPI
DOI:
10.3390/buildings8020032
Author(s):
Revel, Gian Marco; Chiariotti, Paolo; Copertaro, Edoardo; Pandarese, Giuseppe
Published in:
Proceedings of 13th Conference on Advanced Infrared Technology and Applications. (2016)., Issue 1, 2016
Publisher:
University of Luxembourg Library
Author(s):
G.M. Revel, E. Copertaro, P. Chiariotti, G. Pandarese, A. D'Antuono
Published in:
Proceedings of the 2016 International Conference on Quantitative InfraRed Thermography, 2016, ISBN 978-83-917681-1-2
Publisher:
QIRT Council
DOI:
10.21611/qirt.2016.025
Author(s):
Corresponding Author:
Dr Martin Roders MSc
Consultant and Researcher
DEMO Consultants
Delft, the Netherlands
Co-Author 1
Dr Arch Emanuele Piaia
Ipostudio Architetti SRL
Florence, Italy
Co-Author 2
Dr Rizal Sebastian MSc
DEMO Consultants
Delft, the Netherlands
Published in:
The Utrecht Sustainable Built Environment 16 Conference: Transition Zero, Issue 07-04-2016, 2016, Page(s) 33-42, ISBN 978-90-815602-9-0
Publisher:
HU University of Applied Sciences Utrecht, the Netherlands
Author(s):
Rizal Sebastian, Ton Damen, André van Delft
DEMO Consultants BV, Delft, The Netherlands
Gian Marco Revel, Antonio D'Antuono
Università Politecnica delle Marche, Ancona, Italy
Milena Martarelli
Università degli Studi e-Campus, Novedrate (CO), Italy
Published in:
"Eighth International Conference on Construction in the 21st Century (CITC-VIII) ""Changing the Field: Recent Developments for Future Engineering and Construction"" May 27-30, 2015, Thessaloniki, Greece", Issue 30-06-2015, 2015, Page(s) 79-86, ISBN 978-0-9894623-7-2
Publisher:
Greenville, North Carolina, USA
Author(s):
Andrea Venanzoni, Laurent De Ryck, Jacques Cuenca
Published in:
AIP Conference Proceedings volume 1740, 2016, Page(s) 040003
Publisher:
AIP Publishing
DOI:
10.1063/1.4952662
Searching for OpenAIRE data...
There was an error trying to search data from OpenAIRE
No results available