Objetivo
The needs to reduce cost and provide added value by integration of functions is demanding for a weight and volume constrained design onaircraft and satellite. On the last years, lightweight composite materials have been increasingly used to reduce the structural weight andvolume of equipment components. However, concentrating solely on structural mass reduction does not lead to further lowering ofequipment mass because the structure typically represents as little as 10 to 15% of the total mass. The envisaged solution is to designstructural elements that can integrate multiple functions, known as multifunctional structures, MFS.In the conventional avionics equipment design, structural, thermal and electronic functions are generally designed and fabricated intoseparate elements:Load support based on shells and metallic frames structuresThermal management based on radiators or cold platesElectronics enclosures based on metallic black boxes and rigid PCBElectronic/power distribution based on Cables bundles / harnessThese functions intend to be integrated under the MSF design, consisting in structural composite panels and composite housings that haselectric properties ( Patch within flexible integrated circuits mounted directly on the composite panel) and thermal properties ( heattransfer elements embedded on the composite panel as thermal doublers and straps made of high conductive graphite fibres oralternatively active thermal integrated refrigeration circuits as fluid loops).The proposal objective is the development of lightweight -fully integrated advanced equipment for aircraft and spacecraft (avionicselectronic housings) based on these multifunctional structures with disruptive design concepts. It is propose an innovation type of project,specification focused, within a building block approach, where four breadboard will be design and manufactured.
Ámbito científico
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringastronautical engineeringspacecraft
- engineering and technologymechanical engineeringthermodynamic engineering
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraft
- engineering and technologynanotechnologynano-materials
- engineering and technologymaterials engineeringcompositescarbon fibers
Tema(s)
Convocatoria de propuestas
FP6-2003-AERO-1
Consulte otros proyectos de esta convocatoria
Régimen de financiación
STREP - Specific Targeted Research ProjectCoordinador
SAN SEBASTIAN
España