Development of A Portable 3D Deformation Sensor for High Temperature Creep Measurement

Informazioni relative al progetto

HTCSensor

ID dell’accordo di sovvenzione: 329336

Progetto chiuso

Data di avvio 31 Ottobre 2013

Data di completamento 30 Ottobre 2015

Finanziato da

• Specific programme "People" implementing the Seventh Framework Programme of the European Community for research, technological development and demonstration activities (2007 to 2013)

Costo totale € 231 283,20

Contributo UE € 231 283,20

Coordinato da

TWI LIMITED
United Kingdom

Obiettivo

Most of Europe’s power plants have reached or exceeded their 25 year creep design life. Safe extension of operating lifetime requires new inspection techniques that can detect creep damage in service. Researches have shown that, although failures in power plants often have multiple modes, the creep and fatigue are predominant for high temperature components. On the other hand, in order to reduce CO2 emissions and improving the electricity generating efficiency, engineering components are designed to operate at elevated temperature and pressure. It is expected that future power plants will run with steam temperatures up to 700°C in order to achieve thermal efficiencies of ~50%. To ensure the structural integrity of both the existing power plant and the new ones, it is crucial to understand the creep behaviour and measure/monitor the mechanical behaviour of the structures and components at elevated temperature. This proposal aims to develop a portable 3D deformation sensor for high temperature creep (HTC) measurement where direct sensor attachment and human access are difficult or dangerous. Advanced diagnostic algorithms will also be developed to assess the remaining life of the components based on creep measurement results. The technique will also have wide applications in other industrial sectors such as automotive and aerospace sectors.
The main objectives of the project are:
• To develop an optimised portable 3D deformation sensor for HTC measurement. The issues to be addressed include band-pass filter, illumination, movable platform, and image correction or deblurring algorithms etc.
• To develop techniques to fabricate speckle patterns that can survive long-term harsh environment.
• To Improve algorithms for accurate measurement of 3D deformation.
• To develop algorithms for remaining life assessment based on creep measurement results.
• To conduct laboratory tests and mock-up trials to validate the technique.

Campo scientifico

Not validated

• engineering and technology › electrical engineering, electronic engineering, information engineering › electronic engineering › sensors

Programma(i)

• FP7-PEOPLE - Specific programme "People" implementing the Seventh Framework Programme of the European Community for research, technological development and demonstration activities (2007 to 2013)

Argomento(i)

• FP7-PEOPLE-2012-IIF - Marie Curie Action: "International Incoming Fellowships"

Invito a presentare proposte

FP7-PEOPLE-2012-IIF
Vedi altri progetti per questo bando

Meccanismo di finanziamento

MC-IIF - International Incoming Fellowships (IIF)

Coordinatore

TWI LIMITED

• Contributo UE: € 231 283,20
• Indirizzo: GRANTA PARK GREAT ABINGTON ; CB21 6AL Cambridge ; Regno Unito
• Regione: East of England › East Anglia › Cambridgeshire CC
• Tipo di attività: Private for-profit entities (excluding Higher or Secondary Education Establishments)
• Contatto amministrativo: Sherry Nielander (Mrs.)
• Costo totale: Nessun dato