Skip to main content
European Commission logo
English English
CORDIS - EU research results
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary
Content archived on 2024-05-28

Small Integrated Navigator for PLanetary EXploration

Objective

"The main goal of the SINPLEX project is to develop an innovative solution in order to reduce significantly the mass of the navigation subsystem for exploration missions which include a landing and/or a rendezvous and capture or docking phase. It is a contribution to the strengthening of the European position for space exploration. It targets increasing the scientific return of exploration missions, enabling new types of missions and targets, and reducing launch cost and travel time.

Several planned international space exploration missions target the Moon, asteroids, comets, planets and planetary moons. They will bring robotic vehicles to these targets and will provide the capability to return samples to Earth. In general for all space mission but in particula for this kind of missions, mass is one of the most critical factors. Therefore reducing the mass of components or complete subsystems of an exploration vehicle is a key enabling factor for the future exploration of our solar system and beyond.

The mass reduction - while still creating a good navigation performance - is achieved by (1) applying functional integration of the different sensors, (2) utilizing micro and nanotechnologies for compacting electronics, and (3) using sensor hybridization approaches to improve the performance of the complete navigation subsystem.

The project’s objectives are: (a) the development of a integrated novel navigation subsystem architecture, (b) the production of a breadboard and (c) the demonstration of its applicability for object relative robotic navigation for space applications (TRL 4).

The first phase of the project will focus on elaborating the requirements and defining an architecture of the navigation system. This will be followed by design phase, a manufacturing phase and a verification phase where the produced beadboard hardware and software will be tested in terrestrial test benches and test facilities."

Call for proposal

FP7-SPACE-2011-1
See other projects for this call

Coordinator

DEUTSCHES ZENTRUM FUR LUFT - UND RAUMFAHRT EV
EU contribution
€ 734 427,00
Address
LINDER HOHE
51147 Koln
Germany

See on map

Region
Nordrhein-Westfalen Köln Köln, Kreisfreie Stadt
Activity type
Research Organisations
Links
Total cost
No data

Participants (4)