Skip to main content
European Commission logo
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary
Contenu archivé le 2024-06-18

Development of a rapid configuration system for textile production machinery based on the physical behaviour simulation of precision textile structures

Objectif

The textile industry faces important challenges regarding the production of new advanced textile products. It is not possible to define the characteristics and parameters of a given textile structure due to the difficulty of measuring them. This situation makes very difficult to configure the machines involved in the production of such textiles; the typical practices consists in manufacturing samples and through trial and error adjust the processing operations until the desired characteristics are achieved in the final product. With this procedure it’s very expensive to match the designer’s idea with the final product. The production setup takes a long amount of time and efforts and increases the cost of the final product. This is especially critical when a company is trying to develop new technical textiles. The vast majority of the existing systems capable to simulate textile products are limited to the visual representation, without any kind of mechanical or physical evaluation of the properties of the textile structures. Of course, these tools don’t take into account the configuration of the production machinery, so they aren’t capable of help in the setup of production machinery. Unlike these conventional design systems, the core of this proposal is to develop a virtual simulation system of the physical-mechanical properties of the textile structures oriented to the fast setup of the machines involved in the whole textile chain manufacturing process (yarns, woven fabrics, knit fabrics, needle-punch non-woven, hydro-tangled non-woven, and composite structures). This virtual construction system will allow the prediction of the multifunctional textile performance before the actual textile is manufactured allowing the settings of the production machines to be either an input or an output of the computation thus reducing dramatically the effort and cost to produce small batches or develop a new advanced technological textile.

Appel à propositions

FP7-NMP-2007-SMALL-1
Voir d’autres projets de cet appel

Coordinateur

UNIVERSITAT POLITECNICA DE CATALUNYA
Contribution de l’UE
€ 1 340 466,00
Adresse
CALLE JORDI GIRONA 31
08034 Barcelona
Espagne

Voir sur la carte

Région
Este Cataluña Barcelona
Type d’activité
Higher or Secondary Education Establishments
Contact administratif
Valentí Guasch (Mr.)
Liens
Coût total
Aucune donnée

Participants (11)