Skip to main content
European Commission logo
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary
Contenu archivé le 2024-06-18

Carbon Nanotube Confinement Strategies to Develop Novel Polymer Matrix Composites

Objectif

Light composite materials for load bearing applications can be made using different type reinforcements and polymer matrices. Carbon nanotubes (CNT) have been studied extensively because of their exceptional mechanical and electrical properties, yet their practical and extensive use in commercial materials is missing. The utilization of CNTs as reinforcement to design novel composites is a quite old idea. However, there is a lack of a knowledge based approach to achieve the nanostructuration level required to optimize the CNT/polymer composite performances. The main objective of POCO is to get innovative polymer composites filled with CNT in order to obtain nanostructured materials with tailor made properties. The CNT/polymer interface is, together with the CNT and the polymer, the third and most important element that will determine the final properties. Hence the chemical functionalization of CNT surfaces is of utter importance to achieve not only a proper dispersion and anchorage of the nanotubes into the polymer matrix during processing, but also to optimize the performance itself in solid state. Our approach involves the development of different CNT confinement strategies to develop novel polymer matrix nanocomposites. Several polymers have been selected as representative of thermosetting and thermoplastic materials. This ensures that the output of POCO could be applied in a wide range of applications: automotive, aeronautics, building, aerospace, wind power generation (blades), ship building, biomedicine…This project will be focused on four fundamental properties: (i) high strength for structural and mechanical components, (ii) tuneable electrical properties, (iii) low wear under fretting (low amplitude reciprocating movement) and (iv) superhydrophobicity. Multifunctionality of these materials will be an important benefit as the requirements for composite polymeric materials are quite diverse

Appel à propositions

FP7-NMP-2007-LARGE-1
Voir d’autres projets de cet appel

Coordinateur

FUNDACION TEKNIKER
Contribution de l’UE
€ 489 699,70
Adresse
CALLE INAKI GOENAGA 5
20600 Eibar Guipuzcoa
Espagne

Voir sur la carte

Région
Noreste País Vasco Gipuzkoa
Type d’activité
Research Organisations
Contact administratif
Borja Coto (Mr.)
Liens
Coût total
Aucune donnée

Participants (16)