Skip to main content
European Commission logo
English English
CORDIS - EU research results
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary
Content archived on 2024-05-28

Adaptive and Passive Flow Control for Fan Broadband Noise Reduction

Objective

Air traffic is predicted to grow by 5% per year in the short and medium term. Technology ad-vances are required to achieve this growth without unacceptable levels of noise. FLOCON addresses this issue by reducing fan noise at source through the development of innovative concepts based on flow control technologies. FLOCON is aimed primarily at reducing fan broadband noise. This is one of the most signifi-cant noise sources on modern aircraft and FLOCON provides one essential element of a wider effort by the industry to achieve established targets for noise reduction. Previous attempts at reducing broadband noise have been inhibited by a limited understand-ing of the dominant mechanisms and by a lack of high-fidelity numerical models. These is-sues are addressed in the ongoing PROBAND FP6 project. In FP7, FLOCON moves beyond the scope of PROBAND to the development of specific concepts for reducing noise in aero-engine fan stages. A wide range of concepts will be considered and brought up to Technology Readiness Level 4 (laboratory scale validation): • Rotor trailing edge blowing • Rotor tip vortex suction • Rotor overtip treatments • Rotor and Stator leading and trailing edge treatments • Partly lined stator vanes Experiments will be performed on two rotating rigs, supported where possible by more detailed measurements on a single airfoil and a cascade. Numerical methods will be used to optimize the concepts for experimental validation and to extrapolate the results from labora-tory scale to real engine application. The potential benefit of each concept will be assessed, including any associated penalties (weight, complexity, aerodynamic performance). Recommendations will be given as to which concepts could be integrated into new engine designs and which will require further valida-tion at industrial rig or full engine-scale. Required developments in enabling technologies will also be identified.

Call for proposal

FP7-AAT-2007-RTD-1
See other projects for this call

Coordinator

DEUTSCHES ZENTRUM FUR LUFT - UND RAUMFAHRT EV
EU contribution
€ 571 500,00
Address
LINDER HOHE
51147 Koln
Germany

See on map

Region
Nordrhein-Westfalen Köln Köln, Kreisfreie Stadt
Activity type
Research Organisations
Administrative Contact
Christine Zöllter (Ms.)
Links
Total cost
No data

Participants (16)