Descripción del proyecto
A la vanguardia del uso de la lignina como base para producir biorresinas
La sostenibilidad no se limita a los materiales con los que se fabrican artículos, sino que también abarca los distintos materiales de recubrimiento de los que dependen muchos de ellos. Por este motivo, la sostenibilidad de los materiales de recubrimiento estudia la conservación de la energía y los recursos, la minimización de los residuos o la eficiencia. Además, conlleva el uso de productos no tóxicos y renovables. En este contexto, el proyecto financiado con fondos europeos LIGNICOAT está estudiando el uso de la lignina, que presenta un gran potencial en términos de coste y beneficios medioambientales. En concreto, propondrá unas nuevas rutas sintéticas para producir biorresinas derivadas de lignina para materiales de recubrimiento. El objetivo general del proyecto es demostrar la viabilidad técnica, económica y medioambiental.
Objetivo
Sustainability in coatings covers aspects related to energy and resource conservation, waste minimization or efficiency and the use of renewable and non-toxic products. The coatings industry has been driven by regulatory issues to diminish the content of volatile organic compounds to improve indoor and outdoor air quality, shifting from solvent borne systems (still the preferred choice globally) to waterborne ones. However, even in the case of products labelled as “environmentally friendly” their bio-based content is usually small (up to 30-40%). The challenge is to substitute fossil-based resins maintaining at least the same performance. New bio-based value chains are necessary. Lignin is an underutilized product with a high potential to provide not only economic returns, but also environmental benefits if value-added applications are found. Although lignin is a topic of great interest, the conversion of lignocellulosic biomass into real products is not trivial and still no commercial options are available. LIGNICOAT proposal provides new synthetic routes to obtain bioresins “à la carte” (PUD, ALKYD and EPOXY) based on lignin intermediates (Polyols, Epoxies, phosphorylated, polyacids and carbonates) for application in coatings and validated in an industrial relevant environment (TRL5). The target is not only to increase the biobased content and ensure performance, but also take advantage of lignin specific characteristics, to develop bioadditives (enzymes, chitosan, sugars, …), increasing the biocontent and providing anticorrosive, fireproof and antimicrobial/antiviral features in high-volume market case studies. Depending on the intermediates and the resins used, the estimated biocontent of the coatings will vary between 60-90%. A multidisciplinary and complementary consortium consists in 9 industrial partners BARPIMO, VENCOREX, AEP, WESTLAKE, FORESA, BRS, IRIS, ECOAT and AXIA and 4 RTOs, TECNALIA, VITO, VTT, NORCE and ARDITEC.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural.
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural.
- ciencias naturalesciencias químicasquímica inorgánicacompuestos inorgánicos
- ciencias naturalesciencias químicasquímica orgánicacompuestos orgánicos volátiles
- ingeniería y tecnologíaingeniería de materialesrecubrimiento y películas
- ingeniería y tecnologíaingeniería ambientalingeniería de la contaminación atmosférica
- ciencias naturalesciencias biológicasbioquímicabiomoléculasproteínasenzima
Para utilizar esta función, debe iniciar sesión o registrarse
Palabras clave
Programa(s)
- H2020-EU.3.2. - SOCIETAL CHALLENGES - Food security, sustainable agriculture and forestry, marine, maritime and inland water research, and the bioeconomy Main Programme
- H2020-EU.2.1.4. - INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies – Biotechnology
- H2020-EU.3.2.6. - Bio-based Industries Joint Technology Initiative (BBI-JTI)
Régimen de financiación
RIA - Research and Innovation actionCoordinador
48160 DERIO BIZKAIA
España