Descrizione del progetto
Nuovi sensori per il monitoraggio della malattia cardiovascolare
Le malattie cardiovascolari sono la principale causa di morte a livello mondiale, il che rende le innovazioni volte a prevenirle, monitorarle e trattarle estremamente importanti. Di recente, l’attenzione in tal senso è stata rivolta alla realizzazione di soluzioni di monitoraggio, quali i sensori a biosegnale volti a rilevare precocemente segni di malattie cardiovascolari e a consentire pertanto di iniziare il trattamento in modo anticipato. Sfortunatamente, gli attuali sensori a biosegnale sono troppo grandi, ingombranti e costosi, il che ne rende difficile un impiego diffuso. Il progetto UNOPIEZO, finanziato dall’UE, affronterà questo problema sviluppando un polimero piezoelettrico ultrasottile basato su sensori a biosegnale. I sensori impiegheranno tecnologie di fabbricazione basate sull’elettronica stampata e saranno efficienti in termini di costi e dal punto di vista energetico, oltre a non essere invasivi, a risultare più sicuri per l’ambiente e a offrire una maggiore precisione.
Obiettivo
Goal: The goal of this project is to develop unobtrusive, affordable and accurate piezoelectric sensors for non-invasive biosignal monitoring.
Background: Continuous large-scale health monitoring of risk population carries significant benefits to the society, but is hindered by the lack of unobtrusive, affordable and accurate biosignal sensors. As an example, continuous monitoring of radial arterial pulse wave (PW) signal could enable early detection of cardiovascular diseases (CVDs, most common cause of death) and lead to significant reductions in societal costs associated with their treatment and current screening methods, both of which require hospital visits. Ultra-thin (t < 10 µm) sensors have been recently proposed to enhance the user comfort by recording the PW-signal non-invasively from the skin deformation caused by the pulsating radial/carotid artery located directly underneath the skin. Although the proposed devices have high potential for continuous PW-monitoring due to their unobtrusiveness, they suffer from drawbacks such as high energy consumption, costly fabrication, biocompatibility issues and/or low sensitivity.
Proposal: In order to meet the requirements of unobtrusiveness, affordability and accuracy, it is proposed that such biosignal sensors should be fabricated of piezoelectric polymer P(VDF-TrFE) using printed electronics fabrication technologies. The optical transparency and biocompatibility of P(VDF-TrFE) coupled with ultra-thin form factor of the device should result in sensors that are highly unobtrusive for the user. Furthermore, the ultra-thin form factor coupled with novel charge collector structure should maximize the sensor sensitivity, thereby increasing the accuracy of the biosignal measurement beyond the capabilities of conventional sensor structures. The sensor fabrication with additive and scalable printed electronics fabrication technologies should result in devices that are affordable for the user and for the environment.
Campo scientifico
Parole chiave
Programma(i)
Argomento(i)
Meccanismo di finanziamento
MSCA-IF - Marie Skłodowska-Curie Individual Fellowships (IF)Coordinatore
33100 Tampere
Finlandia