Fatigue modelling and fast testing methodologies to optimize part design and to boost lightweight materials deployment in chassis parts

Risultati finali

Life cycle assessment and recycling options of Fatigue4Light solutions

The report will present a comparative assessment between conventional and Fatigue4Light BEV PHEV and HEV architectures in order to show benefits linked to the project from an environmental perspective Additionally it will be denoted that innovative recycling options aligned with the circular economy paradigm held

Eco-design of Fatigue4Light materials

Advancement of the four different stages identified in the ecodesign methodology for all material solutions determined will be reflected in this document

Health monitoring techniques for chassis parts

The health monitoring techniques being studied in the project will be explained and the results obtained from the monitoring will be presented in a reportA FRP demonstrator will be manufactured with embedded optical fiber sensors

Gender Equity Policy

This report will contain awareness actions and good practices regarding Gender Equity policies in the consortium.

Report on the contribution to standardization

Report on the activities and results of subtask T10.3.2.

Relevant standardization landscape and applicable standards

A report containing the results of standardization landscape (subtask T10.3.1.)

Final Plan of Use and Dissemination of Results and Communication activities- PUDR

Final report on the exploitation of project results, associated business plans and compilation of dissemination activities done during the project.

Final Data Management Plan

Final report of data management account including all procedures and documentation.

Pubblicazioni

A Damage-Based Uniaxial Fatigue Life Prediction Method for Metallic Materials

Autori: Sergi Parareda; Daniel Casellas; Marc Mares; Antonio Mateo
Pubblicato in: Materials & Design, Numero 231, 2023, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.matdes.2023.112056

Comparison between Fractal and Statistical Approaches to Model Size Effects in VHCF

Autori: Stefano Invernizzi; Davide Paolino; Francesco Montagnoli; Andrea Tridello; Alberto Carpinteri
Pubblicato in: Metals, Numero 12, 2022, ISSN 2075-4701
Editore: MDPI
DOI: 10.3390/met12091499

A unified non-linear energy dissipation-based plastic-damage model for cyclic loading

Autori: A. Cornejo; S. Jiménez; L.G. Barbu; S. Oller; E. Oñate
Pubblicato in: Computer Methods in Applied Mechanics and Engineering, Numero 3, 2022, ISSN 0045-7825
Editore: Elsevier BV
DOI: 10.1016/j.cma.2022.115543

Fatigue resistance evaluation of high Mn-TWIP steel through damage mechanics: A new method based on stiffness evolution

Autori: Sergi Parareda, Daniel Casellas, Antoni Lara, Antonio Mateo
Pubblicato in: International Journal of Fatigue, Numero 156, 2022, ISSN 0142-1123
Editore: Elsevier BV
DOI: 10.1016/j.ijfatigue.2021.106643

Statistical models for estimating the fatigue life, the stress–life relation, and the P-S–N curves of metallic materials in Very High Cycle Fatigue: A review

Autori: A. Tridello; C. Boursier Niutta; M. Rossetto; F.Berto; D.S. Paolino
Pubblicato in: Fatigue & Fracture of Engineering Materials & Structures, 2021, ISSN 8756-758X
Editore: Blackwell Publishing Inc.
DOI: 10.1111/ffe.13610

A rule of mixtures approach for delamination damage analysis in composite materials

Autori: Taherzadeh-Fard, Alireza; Cornejo, Alejandro; Jiménez, Sergio; Barbu, Lucia Gratiela
Pubblicato in: Composites Science and Technology, Numero 242, 2023, ISSN 0266-3538
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2023.110160

Understanding the Fatigue Notch Sensitivity of High-Strength Steels through Fracture Toughness

Autori: Parareda, S.; Frómeta, D.; Casellas, D.; Sieurin, H.; Mateo, A.
Pubblicato in: Metals, Numero 13, 2023, ISSN 2075-4701
Editore: MDPI
DOI: 10.3390/met13061117

Simulation of metal punching and trimming using minimal experimental characterization

Autori: Gustafsson, David; Parareda Oriol, Sergi; Ortiz Membrado, Laia; Mateo García, Antonio Manuel; Jiménez Piqué, Emilio; Olsson, Erik
Pubblicato in: Journal of Materials Processing Technology, Numero 321, 2023, ISSN 0924-0136
Editore: Elsevier BV
DOI: 10.1016/j.jmatprotec.2023.118148

Numerical simulation of a rapid fatigue test of high Mn-TWIP steel via a high cycle fatigue constitutive law

Autori: L.A. Gonçalves Junior; S. Jiménez; A. Cornejo; L.G. Barbu; S. Parareda; D. Casellas
Pubblicato in: International Journal of Fatigue, Numero 168, 2023, ISSN 0142-1123
Editore: Elsevier BV
DOI: 10.1016/j.ijfatigue.2022.107444

A numerical framework for modelling tire mechanics accounting for composite materials, large strains and frictional contact

Autori: Cornejo, A., Mataix, V., Wriggers, P., Barbu, L. G., Oñate, E.
Pubblicato in: Computational Mechanics, Numero 73, 2024, ISSN 1432-0924
Editore: Springer
DOI: 10.1007/s00466-023-02353-4

Embedding Fiber Optical Sensors in FRP-Hybrid Materials

Autori: J. Pettersson; C. Sterner; H. Dykhoff
Pubblicato in: TWENTY-THIRD INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2023
Editore: Queen's University Belfast, University Road
DOI: 10.5281/zenodo.8276443

Fracture toughness to assess the effect of trimming on the fatigue behaviour of high-strength steels for chassis parts

Autori: Parareda, Sergi; Frómeta, David; Casellas, Daniel; Gustafsson, David; Olsson, Erik; Munier, Remi; Mateo, A.
Pubblicato in: IOP Conference Series: Materials Science and Engineering, 2023
Editore: IOP publishing
DOI: 10.1088/1757-899x/1284/1/012073

Risultati finali

Pubblicazioni

Condividi questa pagina

Scarica