Cel
NEWSPEC aims at the production of Carbon Fibres (CFs) through very promising low-cost sustainable polyethylene (PE) precursors. PE can be derived from three independent sources: bio-ethanol, synthetic oil and recycled plastics. A main attribute of this project is the use of an available pilot scale facility (HPFC) that allows design and optimization of continuous CF processing and, at a later date, easy scale up to a larger industrial size plant.
For PE stabilisation an original dry oxidation method, assisted by Electron Beam Curing (EBC), that introduces heteroatoms at the precursor stage is proposed. The new approach has technical, economic and ecologic advantages thus ensuring very innovative and flexible development of new CFs. Novel strategies for the reduction of the graphitisation temperature via the use of nucleation agents such as cellulose nanowhiskers, CNTs and fine graphite powders are envisaged. The partners will also explore the possibility of surface modification via atmospheric plasma techniques and room-temperature grafting with specific surface-attacking chemicals. Online non-destructive laser Raman probe, that can provide in situ information for the development of the various fibre structures during the processing stages, will be developed and installed at HPFC.
Specific carbon composite prototypes will be manufactured and tested by the end-users during the lifetime of the project to ensure the validation of CF functionality for the final components with this ensuring proper exploitation of results. To prove overall environmental and economic sustainability LCA and LCC are implemented within all phases of the project.
NEWSPEC brings together the best available expertise in Europe for the development of the PE-CFs up to mature exploitable technology. It consists of RTD performers with well-documented experience in CFs development and industrial end-users who are specialist in the target market segments. Half of the partners are European SMEs.
Dziedzina nauki
Zaproszenie do składania wniosków
FP7-NMP-2013-LARGE-7
Zobacz inne projekty w ramach tego zaproszenia
System finansowania
CP-IP - Large-scale integrating projectKoordynator
24126 BERGAMO
Niderlandy
Zobacz na mapie
Uczestnicy (13)
73770 Denkendorf
Zobacz na mapie
74360 Ilsfeld
Zobacz na mapie
EX4 4QJ Exeter
Zobacz na mapie
2400 Mol
Zobacz na mapie
70013 Irakleio
Zobacz na mapie
42015 Correggio Re
Zobacz na mapie
24040 Stezzano
Zobacz na mapie
40019 SANT AGATA BOLOGNESE BO
Zobacz na mapie
16675 Glyfada Athina
Zobacz na mapie
Zakończenie uczestnictwa
33130 BEGLES
Zobacz na mapie
49008 Dniepropetrovsk
Zobacz na mapie
63165 MUHLHEIM AM MAIN
Zobacz na mapie
BS8 1QU Bristol
Zobacz na mapie