Skip to main content
European Commission logo
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary
Zawartość zarchiwizowana w dniu 2024-06-18

Development of Advanced Shearography System for On-Site Inspection of Wind Turbine Blades

Cel

Wind energy is a fast growing (>20% pa) industry worldwide and European companies have two-thirds of the share, according to European Wind Energy Association. Due to the increase in wind farms, new techniques are required to provide maintenance and inspection of the wind installations with reduced cost and enhanced reliability. It is estimated that the business opportunity for wind turbine blade inspection is at least €1bn per annum, and is increasing rapidly.

In the DashWin project, a novel non-contact NDT system will be developed. It will consist of an advanced shearography kit and a robotic deployment platform. The system will be able to inspect the composite wind turbine blades (WTB) on-site without dismantling the blades, so that the degradation of WTB due to fatigue or natural incidents can be found before a breakdown or catastrophic failure occurs which is significantly better than existing systems.

Objectives:
• Develop a novel shearographic system able to inspect WTB on-site without dismantling the blades. This will be the first time that a shearography system is used for inspecting a WTB in-service at a wind energy installation.
The proposed concept and system is not limited to NDT of rotating WTBs, and can be extended to inspect other dynamic structures with large rigid body motion.
• Develop a wavefront splitter and/or a compact spatial carrier mask to achieve simultaneous spatial phase shifting.
• Integrate the shearography system with a robotics platform to carry out on-site inspections.
• Develop a comprehensive software package for image processing, automatic phase compensation, result interpretation and information storage.
• Validate the reliability of the new system and associated opto-mechanical set-ups through a stringent field trial test. System assembly and potential manufacturing routes will also be established.
• Develop and validate a new procedure for conducting regular inspection of WTB using the new robotic shearography system.

Zaproszenie do składania wniosków

FP7-SME-2011
Zobacz inne projekty w ramach tego zaproszenia

System finansowania

BSG-SME - Research for SMEs

Koordynator

TWI LIMITED
Wkład UE
€ 106 072,00
Adres
GRANTA PARK GREAT ABINGTON
CB21 6AL Cambridge
Zjednoczone Królestwo

Zobacz na mapie

Region
East of England East Anglia Cambridgeshire CC
Rodzaj działalności
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Kontakt administracyjny
Kerry Peddar (Ms.)
Linki
Koszt całkowity
Brak danych

Uczestnicy (9)