Skip to main content
European Commission logo
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary
Zawartość zarchiwizowana w dniu 2024-06-18

New Designs of Ecological Furnaces

Cel

The general objective of the EDEFU project consists in developing new technologies of heating, new refractory materials to improve heat insulations and new designs for innovating recovery systems for residues for industrial furnaces in Non ferrous metals, glass, ceramics and cement industries. The evaluation of the success of the project will be realised through the validation of real scale demonstrators and prototypes integrating the new above mentioned technologies.

Thanks to the project the following improvements are expected: 20% reduction in energy consumption is expected compared with current systems, zero particle emission in the atmosphere and the transformation of heat in usable energies, the reduction of at least 50% in the generation of residues through innovating recovery system of residues and reusability of the 100% of the generated CO. These developments, will allow to the generation of new furnaces with greater energetic efficiency and a minimal environmental footprint.

In addition these new technologies will allow reaching efficient operating conditions: reduction of times of fusion, minor power consumption in zones of maintenance and energy storage.
On th emonger term, the project will grealty contribute to increase the competitiveness of the Foundry, Glass, Cement and Ceramic industries often economically unfavoured by new environmental regulations on the European Industry.

The obtained results will be of direct applications in the mentioned industries and can be indirectly applied to other sectors like automotive, aeronautics, railway industries. The four mentioned target industries actually contirbute to produce components for vehicles (engine aluminium block), construction (cement for buildings), ceramic bricks, floor tiles, porcelain, urban furnitures,, food industry (cabbage-cutters, beaters) and electronics: housing, connectors, electrical sector, cables, subjections of electrical laying.

Dziedzina nauki

Program(-y)

Temat(-y)

Zaproszenie do składania wniosków

FP7-NMP-2009-LARGE-3
Zobacz inne projekty w ramach tego zaproszenia

System finansowania

CP-IP - Large-scale integrating project

Koordynator

FUNDACION TECNALIA RESEARCH & INNOVATION
Wkład UE
€ 1 673 791,98
Adres
PARQUE CIENTIFICO Y TECNOLOGICO DE GIPUZKOA, PASEO MIKELETEGI 2
20009 DONOSTIA-SAN SEBASTIAN (GIPUZKOA)
Hiszpania

Zobacz na mapie
Region
Noreste País Vasco Gipuzkoa
Rodzaj działalności
Research Organisations
Kontakt administracyjny
Ane Miren Irazustabarrena Murgiondo (Ms.)
Linki
Koszt całkowity
Brak danych

Uczestnicy (19)

Udostępnij tę stronę

Pobierz

Ostatnia aktualizacja: 25 Maja 2017

Moja broszura

Permalink: https://cordis.europa.eu/project/id/246335/pl

European Union, 2024