Cel
Light composite materials for load bearing applications can be made using different type reinforcements and polymer matrices. Carbon nanotubes (CNT) have been studied extensively because of their exceptional mechanical and electrical properties, yet their practical and extensive use in commercial materials is missing. The utilization of CNTs as reinforcement to design novel composites is a quite old idea. However, there is a lack of a knowledge based approach to achieve the nanostructuration level required to optimize the CNT/polymer composite performances. The main objective of POCO is to get innovative polymer composites filled with CNT in order to obtain nanostructured materials with tailor made properties. The CNT/polymer interface is, together with the CNT and the polymer, the third and most important element that will determine the final properties. Hence the chemical functionalization of CNT surfaces is of utter importance to achieve not only a proper dispersion and anchorage of the nanotubes into the polymer matrix during processing, but also to optimize the performance itself in solid state. Our approach involves the development of different CNT confinement strategies to develop novel polymer matrix nanocomposites. Several polymers have been selected as representative of thermosetting and thermoplastic materials. This ensures that the output of POCO could be applied in a wide range of applications: automotive, aeronautics, building, aerospace, wind power generation (blades), ship building, biomedicine…This project will be focused on four fundamental properties: (i) high strength for structural and mechanical components, (ii) tuneable electrical properties, (iii) low wear under fretting (low amplitude reciprocating movement) and (iv) superhydrophobicity. Multifunctionality of these materials will be an important benefit as the requirements for composite polymeric materials are quite diverse
Dziedzina nauki (EuroSciVoc)
Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego.
Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego.
- inżynieria i technologiainżynieria materiałowamateriały kompozytowe
- nauki przyrodniczenauki chemicznenauka o polimerach
- inżynieria i technologiainżynieria śodowiskaenergetyka i paliwaenergia odnawialnaenergia wiatrowa
- inżynieria i technologiananotechnologiananomateriały
- inżynieria i technologiaprzemysł maszynowyinżynieria pojazdówinżynieria morskastatki morskie
Aby użyć tej funkcji, musisz się zalogować lub zarejestrować
Przepraszamy… podczas wykonywania operacji wystąpił nieoczekiwany błąd.
Wymagane uwierzytelnienie. Powodem może być wygaśnięcie sesji.
Dziękujemy za przesłanie opinii. Wkrótce otrzymasz wiadomość e-mail z potwierdzeniem zgłoszenia. W przypadku wybrania opcji otrzymywania powiadomień o statusie zgłoszenia, skontaktujemy się również gdy status ulegnie zmianie.
Słowa kluczowe
Zaproszenie do składania wniosków
FP7-NMP-2007-LARGE-1
Zobacz inne projekty w ramach tego zaproszenia
System finansowania
CP-IP - Large-scale integrating projectKoordynator
20600 Eibar Guipuzcoa
Hiszpania
Zobacz na mapie
Uczestnicy (16)
92800 PUTEAUX, LA DEFENSE
Zobacz na mapie
82024 Taufkirchen
Zobacz na mapie
01069 Dresden
Zobacz na mapie
7000 Mons
Zobacz na mapie
48940 Leioa
Zobacz na mapie
31100 Toulouse
Zobacz na mapie
50121 Florence
Zobacz na mapie
4206AC Gorinchem
Zobacz na mapie
20014 San Sebastian
Zobacz na mapie
75794 Paris
Zobacz na mapie
10036 SETTIMO TORINESE
Zobacz na mapie
28033 MADRID
Zobacz na mapie
10043 Orbassano
Zobacz na mapie
45110 Ioannina
Zobacz na mapie
1053 Buenos Aires
Zobacz na mapie
8600 Dubendorf
Zobacz na mapie